Huzzah!!! Finally a decent wifi phone!! On Wed, Aug 31, 2011 at 4:14 PM, Matthew Kitchin (public/usenet) < [email protected]> wrote:
> This is a fun 1 way conversation, but I will continue on. > The 8440 works great. You can tell it is built on the Soundpoint SIP stack. > It just works. I'm surprised at how little I have had to tell it. It just > works. Hold, transfers, IVR, VM, everything. I cannot find any feature that > does not work. > > On 8/31/2011 6:20 AM, Matthew Kitchin (usenet/public) wrote: > > It seems great so far. I haven't been able to find anything that doesn't > work. > ------------------------------ > *From: * "Matthew Kitchin (public/usenet)" > <[email protected]><[email protected]> > *Date: *Tue, 30 Aug 2011 14:41:48 -0500 > *To: *Discussion list for users of sipXecs software > <[email protected]> <[email protected]> > *Subject: *Re: [sipx-users] Spectralink 8400 (and 3.3 firmware) > > Woohooo! > We are up and going with the 8440. It was a setting on our Cisco WAPs where > we had to disable Admission Control in a second place. I'm not to sure what > the details are on that setting, but I will get them and document if the > phone passes all our tests. > > On 8/29/2011 10:44 AM, Matthew Kitchin (public/usenet) wrote: > > I know there was someone else on the list playing with these. Any luck? > They look like they have some potential, but I can't even get it to stay on > my wifi network. It connects for a second, and then pukes with a ton of > errors. Polycom has my Cisco WAP config, and they even built the Spectralink > config for me. > > On 8/14/2011 11:57 AM, Tony Graziano wrote: > > Since the Spectralink's are not plug and play or configurable by sipx > directly (plugin welcome), there would be nothing to prevent you from > configuring them manually, realize that firmware 3.3 behavior has not been > tested (in general) with sipx yet. > > Polycom does have a linux tool to convert the 3.2.x or earlier configs to > 3.3 formats. Realize also when doing this sipx will overwrite these when > doing an upgrade or making a change on a phone. It is very possible to run > the config tool against some select phones to test different call scenarios > against sipx. > > I would also suggest that running this tool and opening the config file > for a generic polycom spiundpoint ip and comparing it to the sipxconfig > generated profile will allow a spectralink configuration the following; to > donload a manually configured spectralink and compere the 3.3.x config file > against a soundpoint ip config file that has been run through the upgrade > tool in order to get the correct syntax and parameters. Thusly, one could > create/edit the spectralink file and make it available in the tftp root for > sipxconfig so "additional" phones could manually create/edit the configs, > yet be automatically provisioned. > > Realize the 3.3 firmware has some really sought after features which have > not been addressed yet (phone PIN unlock, hot reload of config without > restarting, etc.). The config files have also been streamlined from a > parameters standpoint (condensed) and the number of config files per phones > have been consolidated (reduced). > > Personally, the constant issues with Spectralink's we've experienced and > helped people with at our office really get diminished by using the Kirk > (DECT) stuff instead. I do realize this is a tougher sell for organizations > that already have a wifi infrastructure and want to utilize it. > > Good luck with the Spectralink and keep us posted. > On Fri, Aug 12, 2011 at 9:25 PM, Matthew Kitchin (usenet/public) < > [email protected]> wrote: > >> I got 2 8440s in. I got them on wifi at least. That was a little bit of a >> challenge. I'm out next week, but I will dig in more on the sip setup the >> following week. I wanted to throw one more request out there to see if >> anyone has done any of the work on 3.3 or higher (I think the 8440 actually >> runs 4.X) config files for soundpoint phones? >> ------------------------------ >> *From: * "Matthew Kitchin (public/usenet)" <[email protected]> >> *Date: *Wed, 03 Aug 2011 15:10:32 -0500 >> *To: *<[email protected]> >> *Subject: *Re: [sipx-users] Spectralink 8400 (and 3.3 firmware) >> >> I should have a 8440 to test with in the next day or 2. >> Has anyone done any development work with Polycom Soundpoint 3.3 firmware >> that they can share to get me pointed in the right direction? >> >> On 8/1/2011 8:28 PM, Todd Hodgen wrote: >> >> Yes, that is why I am getting a demo system from Polycom. >> >> >> >> *From:* [email protected] [ >> mailto:[email protected]<[email protected]>] >> *On Behalf Of *Tony Graziano >> *Sent:* Monday, August 01, 2011 5:12 PM >> *To:* Discussion list for users of sipXecs software >> *Subject:* Re: [sipx-users] Spectralink 8400 >> >> >> >> 3.3 is not tested with sipx yet at all... >> >> On Mon, Aug 1, 2011 at 8:02 PM, Todd Hodgen <[email protected]> wrote: >> >> I was told they would be on 3.3+ >> >> >> >> *From:* [email protected] [mailto: >> [email protected]] *On Behalf Of *Tony Graziano >> *Sent:* Monday, August 01, 2011 2:43 PM >> >> >> *To:* Discussion list for users of sipXecs software >> >> *Subject:* Re: [sipx-users] Spectralink 8400 >> >> >> >> yeah.. but what version of the sip stack are those devices on? 2.2? >> >> On Mon, Aug 1, 2011 at 5:41 PM, Matthew Kitchin (public/usenet) < >> [email protected]> wrote: >> >> FYI, from Polycom >> Me: "is the Spectralink 8440 the model that I heard about that was built >> on the Soundpoint sip stack, or is it the same as the 8020" >> Polycom: "Yes, the 8440 and 8450 phones are built on the SPIP stack." >> >> >> >> On 7/28/2011 1:26 PM, Matthew Kitchin (public/usenet) wrote: >> >> Was that 8440 (not 8040)? >> I am running into issues now with my 8020s that may force me to chunk >> them. Is the 8440 the line that was supposed to be based on the Soundpoint >> sip stack? >> >> On 7/21/2011 9:35 PM, Todd Hodgen wrote: >> >> I am supposed to be receiving some 8040’s for test and evaluation. I’ll >> add something to the wiki when I get it completed. I have not received a >> timeframe yet though. >> >> >> >> *From:* [email protected] [ >> mailto:[email protected]<[email protected]>] >> *On Behalf Of *Paul Curtis >> *Sent:* Thursday, July 21, 2011 2:40 PM >> *To:* [email protected] >> *Subject:* [sipx-users] Spectralink 8400 >> >> >> >> Has anybody tested out the spectralink 8400 from polycom? I know the >> wiki talks about the 8020. >> >> -- >> Paul Curtis >> Assistant Director, Office of Information Technology / Senior Engineer >> University of Western States >> 2900 NE 132nd Ave. | Portland, OR 97230 >> Office: (503) 251-5788 | Mobile: (503) 936-6346 | Fax: (503) 251-5759 >> E-mail: [email protected] | Web: http://www.uws.edu/ >> >> >> ------------------------------ >> >> No virus found in this message. >> Checked by AVG - www.avg.com >> Version: 10.0.1390 / Virus Database: 1518/3778 - Release Date: 07/21/11 >> >> >> >> _______________________________________________ >> >> sipx-users mailing list >> >> [email protected] >> >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> >> >> >> >> >> >> _______________________________________________ >> sipx-users mailing list >> [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> >> >> >> >> -- >> ====================== >> Tony Graziano, Manager >> Telephone: 434.984.8430 >> sip: [email protected] >> Fax: 434.326.5325 >> >> Email: [email protected] >> >> LAN/Telephony/Security and Control Systems Helpdesk: >> Telephone: 434.984.8426 >> sip: [email protected] >> >> Helpdesk Contract Customers: >> http://support.myitdepartment.net >> >> >> >> Blog: >> >> http://blog.myitdepartment.net >> >> >> >> Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 >> >> >> >> Ask about our voip fax services! >> >> >> >> >> _______________________________________________ >> sipx-users mailing list >> [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> >> >> >> >> -- >> ====================== >> Tony Graziano, Manager >> Telephone: 434.984.8430 >> sip: [email protected] >> Fax: 434.326.5325 >> >> Email: [email protected] >> >> LAN/Telephony/Security and Control Systems Helpdesk: >> Telephone: 434.984.8426 >> sip: [email protected] >> >> Helpdesk Contract Customers: >> http://support.myitdepartment.net >> >> >> >> Blog: >> >> http://blog.myitdepartment.net >> >> >> >> Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 >> >> >> >> Ask about our voip fax services! >> >> >> >> >> _______________________________________________ >> sipx-users mailing [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> >> >> >> _______________________________________________ >> sipx-users mailing list >> [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> > > > > -- > ====================== > Tony Graziano, Manager > Telephone: 434.984.8430 > sip: [email protected] > Fax: 434.465.6833 > > Email: [email protected] > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > sip: [email protected] > > Helpdesk Contract Customers: > http://support.myitdepartment.net > > Blog: > http://blog.myitdepartment.net > > Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 > > Ask about our Internet faxservices! > > > > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- Josh Patten eZuce Solutions Architect O.978-296-1005 X2050 M.979-574-5699
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
