I think Tony has offered to start up a group to work on 3.3.x firmware understanding/documentation to begin the process of getting it into sipXecs. This would be to make it easier for the devs down the road. We don't have a driving need for it at this point as attention is focused on some critical backend system work.
Mike On Fri, Aug 12, 2011 at 9:25 PM, Matthew Kitchin (usenet/public) < [email protected]> wrote: > I got 2 8440s in. I got them on wifi at least. That was a little bit of a > challenge. I'm out next week, but I will dig in more on the sip setup the > following week. I wanted to throw one more request out there to see if > anyone has done any of the work on 3.3 or higher (I think the 8440 actually > runs 4.X) config files for soundpoint phones? > ------------------------------ > *From: * "Matthew Kitchin (public/usenet)" <[email protected]> > *Date: *Wed, 03 Aug 2011 15:10:32 -0500 > *To: *<[email protected]> > *Subject: *Re: [sipx-users] Spectralink 8400 (and 3.3 firmware) > > I should have a 8440 to test with in the next day or 2. > Has anyone done any development work with Polycom Soundpoint 3.3 firmware > that they can share to get me pointed in the right direction? > > On 8/1/2011 8:28 PM, Todd Hodgen wrote: > > Yes, that is why I am getting a demo system from Polycom.**** > > ** ** > > *From:* [email protected] [ > mailto:[email protected]<[email protected]>] > *On Behalf Of *Tony Graziano > *Sent:* Monday, August 01, 2011 5:12 PM > *To:* Discussion list for users of sipXecs software > *Subject:* Re: [sipx-users] Spectralink 8400**** > > ** ** > > 3.3 is not tested with sipx yet at all...**** > > On Mon, Aug 1, 2011 at 8:02 PM, Todd Hodgen <[email protected]> wrote:* > *** > > I was told they would be on 3.3+**** > > **** > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Tony Graziano > *Sent:* Monday, August 01, 2011 2:43 PM**** > > > *To:* Discussion list for users of sipXecs software**** > > *Subject:* Re: [sipx-users] Spectralink 8400**** > > **** > > yeah.. but what version of the sip stack are those devices on? 2.2?**** > > On Mon, Aug 1, 2011 at 5:41 PM, Matthew Kitchin (public/usenet) < > [email protected]> wrote:**** > > FYI, from Polycom > Me: "is the Spectralink 8440 the model that I heard about that was built on > the Soundpoint sip stack, or is it the same as the 8020" > Polycom: "Yes, the 8440 and 8450 phones are built on the SPIP stack."**** > > > > On 7/28/2011 1:26 PM, Matthew Kitchin (public/usenet) wrote: **** > > Was that 8440 (not 8040)? > I am running into issues now with my 8020s that may force me to chunk them. > Is the 8440 the line that was supposed to be based on the Soundpoint sip > stack? > > On 7/21/2011 9:35 PM, Todd Hodgen wrote: **** > > I am supposed to be receiving some 8040’s for test and evaluation. I’ll > add something to the wiki when I get it completed. I have not received a > timeframe yet though.**** > > **** > > *From:* [email protected] [ > mailto:[email protected]<[email protected]>] > *On Behalf Of *Paul Curtis > *Sent:* Thursday, July 21, 2011 2:40 PM > *To:* [email protected] > *Subject:* [sipx-users] Spectralink 8400**** > > **** > > Has anybody tested out the spectralink 8400 from polycom? I know the wiki > talks about the 8020. **** > > -- > Paul Curtis > Assistant Director, Office of Information Technology / Senior Engineer > University of Western States > 2900 NE 132nd Ave. | Portland, OR 97230 > Office: (503) 251-5788 <%28503%29%20251-5788> | Mobile: (503) > 936-6346<%28503%29%20936-6346>| Fax: (503) > 251-5759 <%28503%29%20251-5759> > E-mail: [email protected] | Web: http://www.uws.edu/**** > > **** > ------------------------------ > > No virus found in this message. > Checked by AVG - www.avg.com > Version: 10.0.1390 / Virus Database: 1518/3778 - Release Date: 07/21/11*** > * > > **** > > _______________________________________________**** > > sipx-users mailing list**** > > [email protected]**** > > List Archive: http://list.sipfoundry.org/archive/sipx-users/**** > > **** > > **** > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/**** > > > > > -- > ====================== > Tony Graziano, Manager > Telephone: 434.984.8430 > sip: [email protected] > Fax: 434.326.5325 > > Email: [email protected] > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > sip: [email protected] > > Helpdesk Contract Customers: > http://support.myitdepartment.net**** > > **** > > Blog:**** > > http://blog.myitdepartment.net**** > > **** > > Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4*** > * > > **** > > Ask about our voip fax services!**** > > **** > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/**** > > > > > -- > ====================== > Tony Graziano, Manager > Telephone: 434.984.8430 > sip: [email protected] > Fax: 434.326.5325 > > Email: [email protected] > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > sip: [email protected] > > Helpdesk Contract Customers: > http://support.myitdepartment.net**** > > ** ** > > Blog:**** > > http://blog.myitdepartment.net**** > > ** ** > > Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4*** > * > > ** ** > > Ask about our voip fax services!**** > > ** ** > > > _______________________________________________ > sipx-users mailing [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- Michael Picher eZuce Director of Technical Services O.978-296-1005 X2015 M.207-956-0262 @mpicher <http://twitter.com/mpicher> www.ezuce.com
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
