Bump. Anyone able to help? Is there anyone I can turn to for paid support even?
Thanks Steve -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Stephen Barry Sent: 05 September 2011 22:46 To: Discussion list for users of sipXecs software Subject: Re: [sipx-users] Cisco Integration for Voicemail Hi Tony. My x-lite client is configured as follows: User ID: 2311 Domain: voip.system.ads (also tried hostname and IP here) Password: xxxxxxxx Authorization Name: 2311 I have the following DNS records _sip._udp.voip.system.ads SRV sip1.voip.system.ads sip1.voip.system.ads A 192.168.41.91 My SIP trunk to CCM is not configured for registration as CCM does not support this. I have the following Dial Plan entry (if this is relevant/helps at all) Name: Test Dialed Number: Prefix 53 and Two Digits Prefix 54 and Two Digits Prefix 230 and One Digit Require Permissions All Unticked, but I have also tried creating a new permission category and ensured my Xlite user has access to it, this made no difference. Resulting Call: Dial 'Blank' and Append entire dialled number. Schedule: Always Gateways CCM Gateway Many Thanks Steve From: [email protected] [mailto:[email protected]] On Behalf Of Tony Graziano Sent: 05 September 2011 20:52 To: Discussion list for users of sipXecs software Subject: Re: [sipx-users] Cisco Integration for Voicemail are you registering by hostname, ip or sipdomain? On Sep 5, 2011 3:24 PM, "Stephen Barry" <[email protected]> wrote: > Hello > > I am trying to use Sipx for voicemail on Cisco Call Manager, I am keen to > exploit IMAP integration. > > I am able to leave myself a voicemail. However MWI is not working. > > My test extension is 5397 which is an extension on Cisco Call Manager. I have > defined this as a user on SipX to enable VM. > > I have also defined another extension 2311 and I using x-lite I can register > and dial the voicemail pilot 2310 fine. However I cannot dial anything on the > call manager despite having a dial plan entries for 53XX and 54XX that point > to the SIP trunk to CCM, capturing traffic I always get a proxy auth required > error returned to x-lite when dialling these extensions. > > I am thinking this may be related to my MWI issue, either way I need to be > able to dial both ways. > > I have seen similar reported problems in the list but I cannot work it out. I > appreciate that my understanding of dial plans and infact sipx in general may > be lacking. > > I am happy to pay for someone to explain/assist is there anyone able to help > me? > > Many thanks > Steve _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
