If you see no evidence of a call attempt, change to an unmanaged gateway first.
Also check your internet calling settings and make sure the Cisco is inside the internal IP range. Mike On Sat, Sep 10, 2011 at 1:32 PM, Stephen Barry <[email protected]>wrote: > HI Joe > > Thanks for your help. > > I am running CUCM 7.1.5 > I have configured a non secure sip trunk to the IP address of the SipX > server > I have used the standard SIP profile, I Have left all settings as default, > please let me know if there are specific settings of interest, or I can send > a screenshot if that would help. > I have configured the CUCM as a SIP trunk in SipX > > I can see that when making a call from SipX to CUCM that there is no > attempt from SipX to call CUCM before the call fails. > > Many Thanks > Steve > > -----Original Message----- > From: Joe Micciche [mailto:[email protected]] > Sent: 09 September 2011 21:29 > To: Stephen Barry > Subject: Re: [sipx-users] Cisco Integration for Voicemail > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Steve, I do not have the voicemail setup here that you are trying, but can > try to help as we have both CCM and sipX running and calling between them is > solid. > > - - What version of Call Manager are you running? > - - How have you configured the SIP trunk in CCM to sipX? > - - Can you provide info on the SIP profile you used for the SIP trunk in > CCM? > - - Did you set up the SIP trunk as a SIP Trunk or unmanaged gateway in > sipX? > > joe > > On 09/09/2011 01:20 PM, [email protected] wrote: > > Message: 3 Date: Fri, 9 Sep 2011 16:46:51 +0000 From: Stephen Barry > > <[email protected]> Subject: Re: [sipx-users] Cisco > > Integration for Voicemail To: Discussion list for users of sipXecs > > software <[email protected]> Message-ID: > > <3FA4F8C69ECF85478AA5FD2A88F8CF5006DCFB46@ln5-hex1mb-01.hex1.sensical. > > net> > > > > Content-Type: text/plain; charset="us-ascii" > > > > Bump. > > > > Anyone able to help? Is there anyone I can turn to for paid support > > even? > > > > Thanks Steve > > > > -----Original Message----- From: > > [email protected] > > [mailto:[email protected]] On Behalf Of Stephen > > Barry Sent: 05 September 2011 22:46 To: Discussion list for users of > > sipXecs software Subject: Re: [sipx-users] Cisco Integration for > > Voicemail > > > > Hi Tony. > > > > My x-lite client is configured as follows: > > > > User ID: 2311 Domain: voip.system.ads (also tried hostname and IP > > here) Password: xxxxxxxx Authorization Name: 2311 > > > > I have the following DNS records > > > > _sip._udp.voip.system.ads SRV sip1.voip.system.ads > > sip1.voip.system.ads A 192.168.41.91 > > > > My SIP trunk to CCM is not configured for registration as CCM does not > > support this. > > > > I have the following Dial Plan entry (if this is relevant/helps at > > all) > > > > Name: Test > > > > Dialed Number: Prefix 53 and Two Digits Prefix 54 and Two Digits > > Prefix 230 and One Digit > > > > Require Permissions All Unticked, but I have also tried creating a new > > permission category and ensured my Xlite user has access to it, this > > made no difference. > > > > Resulting Call: Dial 'Blank' and Append entire dialled number. > > > > Schedule: Always > > > > Gateways CCM Gateway > > > > Many Thanks Steve > > > > > > From: [email protected] > > [mailto:[email protected]] On Behalf Of Tony > > Graziano Sent: 05 September 2011 20:52 To: Discussion list for users > > of sipXecs software Subject: Re: [sipx-users] Cisco Integration for > > Voicemail > > > > are you registering by hostname, ip or sipdomain? On Sep 5, 2011 > > 3:24 PM, "Stephen Barry" <[email protected]> wrote: > >>> Hello > >>> > >>> I am trying to use Sipx for voicemail on Cisco Call Manager, I am > >>> keen to exploit IMAP integration. > >>> > >>> I am able to leave myself a voicemail. However MWI is not working. > >>> > >>> My test extension is 5397 which is an extension on Cisco Call > >>> Manager. I have defined this as a user on SipX to enable VM. > >>> > >>> I have also defined another extension 2311 and I using x-lite I can > >>> register and dial the voicemail pilot 2310 fine. However I cannot > >>> dial anything on the call manager despite having a dial plan entries > >>> for 53XX and 54XX that point to the SIP trunk to CCM, capturing > >>> traffic I always get a proxy auth required error returned to x-lite > >>> when dialling these extensions. > >>> > >>> I am thinking this may be related to my MWI issue, either way I need > >>> to be able to dial both ways. > >>> > >>> I have seen similar reported problems in the list but I cannot work > >>> it out. I appreciate that my understanding of dial plans and infact > >>> sipx in general may be lacking. > >>> > >>> I am happy to pay for someone to explain/assist is there anyone able > >>> to help me? > >>> > >>> Many thanks Steve > > > - -- > ================================================================== > Joe Micciche [email protected] > Red Hat, Inc. http://www.redhat.com > Senior Communications Engineer X (81) 44554 > +1.919.754.4554 Key: 65F90FE1 > ================================================================== > > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.11 (GNU/Linux) > Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ > > iEYEARECAAYFAk5qdxsACgkQJHjEUGX5D+HgSgCdEUgTfUUoBj08bUiQIrkCQ4t/ > SYoAnRQBdxopkLzQb5vkv6h3K+beZ+Ww > =hDYN > -----END PGP SIGNATURE----- > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- Michael Picher eZuce Director of Technical Services O.978-296-1005 X2015 M.207-956-0262 @mpicher <http://twitter.com/mpicher> www.ezuce.com
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
