that will work. I've done it. as ling and the firewall/trunking nat's properly. On Sep 16, 2011 7:48 AM, "Chris Rawlings" <[email protected]> wrote: > i am thinking of setting up a stand alone pbx in a virtual machine just for > inbound fax > > since it work when voicemail is setup not on exchange voicemail > > On Thu, Sep 15, 2011 at 11:53 AM, Chris Rawlings <[email protected] >wrote: > >> Yes the new user has internal fax voicemail server choosen.. i created >> extension 998 as the Fax Extension >> email address is Fax@*.com >> >> Fax extension is 997 >> Fax phone number is the one provided by gafachi.com >> >> call goes to exchange voicemail instead of fax tone... >> >> >> >> On Thu, Sep 8, 2011 at 12:07 PM, Tony Graziano < >> [email protected]> wrote: >> >>> The new "fax" user has internal voicemail server chosen, correct? >>> >>> In this case, the fax DID goes to what device first to get routed? >>> >>> On Thu, Sep 8, 2011 at 12:02 PM, Chris Rawlings <[email protected] >wrote: >>> >>>> well i tryed my extension another extension and an extension with no >>>> phone associated... all send the call directly to the Exchange UM Voicemail >>>> system >>>> >>>> like i said if i turn exchange um voicemail option off it will work just >>>> fine for faxes... i am thinking of stopping the use of Exchange UM or >>>> setting up a virtual machine PBX just for faxing... don't know yet >>>> >>>> >>>> >>>> >>>> On Thu, Sep 8, 2011 at 11:57 AM, Tony Graziano < >>>> [email protected]> wrote: >>>> >>>>> You are entitled to your opinion. >>>>> >>>>> In the meantime, be a little creative and setup a separate account for >>>>> yourself in sipx and in the unified messaging put in your fax extension and >>>>> did stuff on your secondary account. >>>>> >>>>> If the DID number passes directly from the gateway to sipxivr it will >>>>> work. There does not need to be any phone subscribed, nor any user alias, >>>>> just the fax DID on the UM screen. >>>>> >>>>> If it is going to exchange first, it is negotiation tcp. t.38 >>>>> "does_not_work" over tcp. So now you must make sure exchange can allow >>>>> renegotiating sdp as a result of a transfer. Good luck with that nonsense. >>>>> >>>>> Exchange UM server does not work well with almost ANY other system >>>>> because it is MS's intention to keep this proprietary. When they removed >>>>> some functionality from IMAP, who screamed the loudest? Cisco? Why? Ask >>>>> Redmond. >>>>> >>>>> >>>>> On Thu, Sep 8, 2011 at 11:50 AM, Chris Rawlings <[email protected] >wrote: >>>>> >>>>>> if i have my voicemail dialplan set to an exchange server for unified >>>>>> messaging built into exchange server... and then i have an extension & DID >>>>>> set for a users UM profile on SipXecs it just forwards me to the exchange >>>>>> voicemail server login when i dial that DID associated to the users FAX >>>>>> number... if i change the dialplan back to internal voicemail server i am >>>>>> then able to use faxing without issue. >>>>>> >>>>>> seems like a bad thing here... if i want Unified Messaging with >>>>>> Exchange 2010 i must use Exchange UM Server since IMAP does not work well >>>>>> with exchange 2010... if i want faxing support with sipx while using UM i >>>>>> can not... its one or the other >>>>>> >>>>>> i honestly think Exchange UM support needs a hard look at imho >>>>>> >>>>>> -- >>>>>> Thank You, >>>>>> Chris Rawlings >>>>>> IT Consultant >>>>>> >>>>>> phone - 610.741.3324 >>>>>> >>>>>> VCP RHCE RHCT MCSE >>>>>> >>>>>> _______________________________________________ >>>>>> sipx-users mailing list >>>>>> [email protected] >>>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> ====================== >>>>> Tony Graziano, Manager >>>>> Telephone: 434.984.8430 >>>>> sip: [email protected] >>>>> Fax: 434.465.6833 >>>>> >>>>> Email: [email protected] >>>>> >>>>> LAN/Telephony/Security and Control Systems Helpdesk: >>>>> Telephone: 434.984.8426 >>>>> sip: [email protected] >>>>> >>>>> Helpdesk Contract Customers: >>>>> http://support.myitdepartment.net >>>>> >>>>> <http://support.myitdepartment.net>Blog: >>>>> http://blog.myitdepartment.net >>>>> >>>>> Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 >>>>> >>>>> Ask about our Internet faxservices! >>>>> >>>>> >>>>> _______________________________________________ >>>>> sipx-users mailing list >>>>> [email protected] >>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>>> >>>> >>>> >>>> >>>> -- >>>> Thank You, >>>> Chris Rawlings >>>> IT Consultant >>>> >>>> phone - 610.741.3324 >>>> >>>> VCP RHCE RHCT MCSE >>>> >>>> _______________________________________________ >>>> sipx-users mailing list >>>> [email protected] >>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>> >>> >>> >>> >>> -- >>> ====================== >>> Tony Graziano, Manager >>> Telephone: 434.984.8430 >>> sip: [email protected] >>> Fax: 434.465.6833 >>> >>> Email: [email protected] >>> >>> LAN/Telephony/Security and Control Systems Helpdesk: >>> Telephone: 434.984.8426 >>> sip: [email protected] >>> >>> Helpdesk Contract Customers: >>> http://support.myitdepartment.net >>> >>> <http://support.myitdepartment.net>Blog: >>> http://blog.myitdepartment.net >>> >>> Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 >>> >>> Ask about our Internet faxservices! >>> >>> >>> _______________________________________________ >>> sipx-users mailing list >>> [email protected] >>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>> >> >> >> >> -- >> Thank You, >> Chris Rawlings >> IT Consultant >> >> phone - 610.741.3324 >> >> VCP RHCE RHCT MCSE >> > > > > -- > Thank You, > Chris Rawlings > IT Consultant > > phone - 610.741.3324 > > VCP RHCE RHCT MCSE
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
