Well, voip.ms will support 20 calls inbound on the same DID... why would you need a hunt group?
usually you only need to do this if you have multiple analog lines. On Sat, Nov 19, 2011 at 2:52 PM, [email protected] <[email protected]>wrote: > Does anyone know if any SIP trunk providers offer hunt groups. > > I found a post from a couple of months back where someone was asking about > this but it didn't seem to lead to any answer. > Sipx cannot do this on it's own as far as I understand this, it needs to > be programmed at the providers end. > > Example, 6 line hunt group in a small office. > A call comes in on the main number, the receptionist transfers the call to > someone. > The main number needs to be freed up again in order for another incoming > call, up to say 6 simultaneous callers. > > This is a typical situation where an office has a hunt group or sometimes > called 'rotary' service but in this case, I need to use a SIP provider such > as voip.ms or flowroute. Neither of which appear to offer these services. > > Thanks for any input you can provide. > > Mike > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- Michael Picher, Director of Technical Services eZuce, Inc. 300 Brickstone Square**** Suite 201**** Andover, MA. 01810 O.978-296-1005 X2015 M.207-956-0262 @mpicher <http://twitter.com/mpicher> www.ezuce.com
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
