Mike, Just take a Patton Smartnode gateway (like a 4960), make the SIP side register to the ITSP and have a PRI going into the old PBX.
The Smartnode has the 'smarts' to be able to login to a SIP trunk provider like voip.ms. Then you have a simple single box solution. Mike On Sun, Nov 20, 2011 at 1:14 AM, Todd Hodgen <[email protected]> wrote: > You can use an audiocodes gateway or a Patton Gateway for that > functionality. > > SIP to the Audiocodes/Patton then PRI to the Legacy PBX. It's done all the > time, and provides a migration strategy. > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of > [email protected] > Sent: Saturday, November 19, 2011 8:39 PM > To: sipx-users > Subject: Re: [sipx-users] SIP Hunt Group > > Thanks for the input Tony, and Todd. > > > I don't understand "the twist". You describe multiple Analog lines going > > into a PBX. Are you trying to use sipXecs to provide sip trunks to that > > PBX? I don't understand what the example has to do with the discussion. > > The twist was because I thought I was adding a level of complication by > having to use SIP to analog lines. > But, with everyone's input, I better understand now that there is no > problem > there, it's just a matter of the terminating hardware being able to use the > function or not. > > I am basically wanting to make a case that sipx could replace two PBX's but > wasn't able to find enough information to know how hunt groups could be > dealt with. I know understand that Concurrent Call Sessions is what I am > looking for. > > If the solution could not be 100% sipx, then it might be a combination of > sipx along with ITSP SIP trunks to the old PBX's. The application involves > a > number of locations, all of them having their own PBX's so it's a mix of > things that may end up being the solution. This is why I mentioned looking > for a device which might take a SIP trunk and hand that off as a PRI to an > older PBX. > > Mike > > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- Michael Picher, Director of Technical Services eZuce, Inc. 300 Brickstone Square**** Suite 201**** Andover, MA. 01810 O.978-296-1005 X2015 M.207-956-0262 @mpicher <http://twitter.com/mpicher> www.ezuce.com
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
