Hi all, This is slightly off topic so please feel free to reply to me directly off list if you think it's more appropriate.
I would like to create a separate Freeswitch install on our OpenWRT based router to work as a B2BUA. Very simple requirements: authenticate outgoing calls for our ITSP preferably enforce negotiation of G729 due to limited bandwidth no need to relay RTP, just let it get passed through from the phones to the ITSP directly possibly register with our ITSP for inbound calls (unlikely to be used, but nice as an option) An advantage would also be that it can be started and stopped, etc in line with the state of the connection rather than waiting for a timeout if the Internet is down. I've looked at the Freeswitch documentation but it is heavily aimed at people looking to do more complex setups and you need to learn a lot about it. Some time ago I raised something like this in the freeswitch community and the end result was pretty much that I would've had to learn so much about the product that the result wasn't worth the effort. I'm hoping that someone here could provide me with the basics to get something like this going and then I will document it for both the sipx and freeswitch communities. Regards, Andrew Radke Yuruga Nursery Pty Ltd Clonal Solutions Australia Pty Ltd PO Box 220 Walkamin Qld 4872 Phone: (07) 4093 3826 Fax: (07) 4093 3869 Email: [email protected] Web: www.yuruga.com.au
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
