The current rpms are working mostly... You need to manually install bind, dhcp and ntp. Also, manually configure dns, dhcp, hosts, /etc/sysconfig/network. Then you can yum groupinstall sipxecs.
Very raw at this point. We'll be doing a demo of this at CoLab, also discussing new design considerations, ISO install and upgrade instructions during the day 2 training. Still time to register http://www.sipfoundry.org/sipx-colab Thanks, Mike On Sat, Feb 4, 2012 at 8:28 AM, Tony Graziano <[email protected]>wrote: > I (and others) were asked off list the following: > *** > Dear Mr. Hubler, > > I was wondering if there have been any new developments with > regard to current OS compatibility between CentOS 6.x and sipXecs > (either v4.4 or v4.5 development builds). We have an aging production > sipXecs v4.0.4 Server, and I have been tasked to start researching and > planning for the anticipated release of future version 4.6. Once v4.6 > becomes official, we plan to stand up an entirely new VLAN dedicated > to VoIP devices only. The only hardware that will migrate from our > existing sipXecs network to the new one will be the telephones. > > In summary, these are the items I am curious about right now: > > 1.) Can sipXecs Version 4.4(.0-287) be installed on CentOS 6.2 to > be upgraded to 4.6 upon release? If not. . . > 2.) Can sipXecs Version 0.0.4.5.2.x (development build) be > installed on CentOS 6.2 to be upgraded to 4.6 (Stable) later and > expect it to work properly in a production environment? > > Thank you in advance for your time. . . > > *** > I think it is known that 4.4 will not build on Centos 6. There is no > "in place" upgrade path from Centos 5 to Centos 6 from the Centos > community. The supported method is backup, reinstall, restore. The > same would be true for sipx. As well, the 4.6 install method will be > changing, so it's a great time to check out the dev version (I think). > > Installing a dev version is not really recommended in a production > environment (unless you plan to try out release candidates when they > are available and are aware of the consequences, etc.). > > So the answer to #1 is = No. > The answer to #2 is = Yes. (I have a test environment to install this > on and see if the issues with FS are worked out yet, if not, I'm sure > someone will post when they are). > > On Tue, Nov 1, 2011 at 10:19 AM, Douglas Hubler <[email protected]> wrote: > > On Tue, Nov 1, 2011 at 9:52 AM, Tony Graziano > > <[email protected]> wrote: > >> Are there any issues with installing centos6 on a machine and installing > >> sipx 4.4 via rpm methos, so the update is a yum method or at least > easier > >> for planning purposes? > > > > only issue is that sipx 4.4 doesn't build on centos 6. ;) > > > > I'd have to investigate a few freeswitch patches that allowed for > > centos 6 support, but the patches to sipxecs to support centos 6 i > > think could be back ported fairly easily. I almost did this before so > > I could regression test 4.4 so it might be worth the effort. > > > > A sipxecs 4.4 + CentOS 6 ISO might be a bit harder, but not sure until > > i dig into what's changed in CentOS 6 ISO creation. > > > > Thanks Tony and Gerald for simultaneous, good recommendations. > > _______________________________________________ > > sipx-users mailing list > > [email protected] > > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > > > -- > ~~~~~~~~~~~~~~~~~~ > Tony Graziano, Manager > Telephone: 434.984.8430 > sip: [email protected] > Fax: 434.465.6833 > ~~~~~~~~~~~~~~~~~~ > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > sip: [email protected] > > Helpdesk Customers: http://myhelp.myitdepartment.net > Blog: http://blog.myitdepartment.net > > Linked-In Profile: > http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 > Ask about our Internet Fax services! > > -- > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > sip: [email protected] > > Helpdesk Customers: http://myhelp.myitdepartment.net > Blog: http://blog.myitdepartment.net > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- Michael Picher, Director of Technical Services eZuce, Inc. 300 Brickstone Square**** Suite 201**** Andover, MA. 01810 O.978-296-1005 X2015 M.207-956-0262 @mpicher <http://twitter.com/mpicher> www.ezuce.com ------------------------------------------------------------------------------------------------------------ Hope to see you at the sipX CoLab! http://www.sipfoundry.org/sipx-colab A gathering for - open source users, eZuce customers & eZuce partners Get the inside track on 4.6 and a glimpse at the future of sipXecs!
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
