2/11/2012 - Tony Graziano [email protected]<mailto:[email protected]>
"You should not be using any swap! I think you need at least 4GB ram installed on any system. There's no mystery here, just a lack of resources. When you start using swap on ANY system, performance suffers. Install more ram and you will see an immediate improvement." I inferred from this that I needed to increase the ram to 4 GB, and turn off the swap What I am hearing now is that if I have enough ram, the system will not use the swap Thanks again for your help Ken From: [email protected] [mailto:[email protected]] On Behalf Of Tony Graziano Sent: Saturday, February 25, 2012 5:20 PM To: Discussion list for users of sipXecs software Subject: Re: [sipx-users] All phone registrations expiring I'm saying it doesn't matter how much swap you have or don't have... you still need a reasonable amount of ram. If you are running out of ram that quickly you should have more. Go ahead and turn off swap, wait until the ram is fine and login and run a cdr report and see how that works (or doesn't) for you. See how the whole permgenspace things works without enough ram... Good luck. On Feb 25, 2012 8:02 PM, "Ken Ridley" <[email protected]<mailto:[email protected]>> wrote: Douglas Hubler <[email protected]<mailto:[email protected]>> "I assert, and I could be proven wrong, that if you want best performance with least amount of memory is that you turn *off* swap" I'm confused Tony, are you saying that you just keep adding memory, until the swap is not needed? From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Tony Graziano Sent: Saturday, February 18, 2012 4:26 PM To: Discussion list for users of sipXecs software Subject: Re: [sipx-users] All phone registrations expiring You don't. On Feb 18, 2012 6:56 PM, "Ken Ridley" <[email protected]<mailto:[email protected]>> wrote: Thanks for the help, Ram is on order, but how do I permanently remove/turn off the swap? From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Tony Graziano Sent: Saturday, February 11, 2012 2:39 PM To: Discussion list for users of sipXecs software Subject: Re: [sipx-users] All phone registrations expiring You should not be using any swap! On Feb 11, 2012 5:29 PM, "Ken Ridley" <[email protected]<mailto:[email protected]>> wrote: This is the info I collected Shouldn't it be using more of the swap? top - 14:02:47 up 3 days, 23:01, 1 user, load average: 1.17, 0.62, 0.38 Tasks: 115 total, 3 running, 111 sleeping, 0 stopped, 1 zombie Cpu(s): 2.3%us, 1.0%sy, 0.0%ni, 96.4%id, 0.3%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1294672k total, 1254548k used, 40124k free, 235340k buffers Swap: 6289436k total, 2212k used, 6287224k free, 461656k cached I also found no Fake registrations in the logs From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Tony Graziano Sent: Friday, February 10, 2012 1:33 PM To: Discussion list for users of sipXecs software Subject: Re: [sipx-users] All phone registrations expiring it sounds as though it is a resource issue. look at top. are you using any swap? look in the registration logs for "fake" registration attempts (hint: look at the log sizes for the previous several days, if there is a larger file, then LOOK at that file). If these are FAKE registrations (script or dos attack), address this at your firewall. On Fri, Feb 10, 2012 at 4:23 PM, Ken Ridley <[email protected]<mailto:[email protected]>> wrote: I Checked all of the messages I have received from this group, and I found a thread about this issue, and it says to check the logs Is this the only option? If it is, what log do I check, and what am I looking for? This has happened twice on this system, rebooting it fixes the problem Thank you, Ken Ridley _______________________________________________ sipx-users mailing list [email protected]<mailto:[email protected]> List Archive: http://list.sipfoundry.org/archive/sipx-users/ -- ~~~~~~~~~~~~~~~~~~ Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected]<mailto:[email protected]> Fax: 434.465.6833 ~~~~~~~~~~~~~~~~~~ Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 Ask about our Internet Fax services! ~~~~~~~~~~~~~~~~~~ LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected]<mailto:[email protected]> Helpdesk Customers: http://myhelp.myitdepartment.net Blog: http://blog.myitdepartment.net _______________________________________________ sipx-users mailing list [email protected]<mailto:[email protected]> List Archive: http://list.sipfoundry.org/archive/sipx-users/ LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected]<mailto:[email protected]> Helpdesk Customers: http://myhelp.myitdepartment.net Blog: http://blog.myitdepartment.net _______________________________________________ sipx-users mailing list [email protected]<mailto:[email protected]> List Archive: http://list.sipfoundry.org/archive/sipx-users/ LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected]<mailto:[email protected]> Helpdesk Customers: http://myhelp.myitdepartment.net Blog: http://blog.myitdepartment.net _______________________________________________ sipx-users mailing list [email protected]<mailto:[email protected]> List Archive: http://list.sipfoundry.org/archive/sipx-users/ LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected]<mailto:[email protected]> Helpdesk Customers: http://myhelp.myitdepartment.net Blog: http://blog.myitdepartment.net
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
