If you're going to 4, you may as well just go to 8 if the machine can take it... Won't be that much more $$.
Mike On Sat, Feb 25, 2012 at 10:02 PM, Ken Ridley <[email protected]> wrote: > 2/11/2012 - Tony Graziano [email protected] **** > > “You should not be using any swap!**** > > I think you need at least 4GB ram installed on any system. There’s no > mystery here, just a lack of resources.**** > > When you start using swap on ANY system, performance suffers.**** > > Install more ram and you will see an immediate improvement.”**** > > ** ** > > I inferred from this that I needed to increase the ram to 4 GB, and turn > off the swap**** > > What I am hearing now is that if I have enough ram, the system will not > use the swap**** > > ** ** > > Thanks again for your help**** > > Ken**** > > ** ** > > ** ** > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Tony Graziano > *Sent:* Saturday, February 25, 2012 5:20 PM > > *To:* Discussion list for users of sipXecs software > *Subject:* Re: [sipx-users] All phone registrations expiring**** > > ** ** > > I'm saying it doesn't matter how much swap you have or don't have... you > still need a reasonable amount of ram.**** > > If you are running out of ram that quickly you should have more.**** > > Go ahead and turn off swap, wait until the ram is fine and login and run a > cdr report and see how that works (or doesn't) for you. See how the whole > permgenspace things works without enough ram...**** > > Good luck.**** > > On Feb 25, 2012 8:02 PM, "Ken Ridley" <[email protected]> wrote:**** > > Douglas Hubler <[email protected]> “I assert, and I could be proven > wrong, that if you want best performance with least amount of memory is > that you turn *off* swap”**** > > **** > > I’m confused**** > > **** > > Tony, are you saying that you just keep adding memory, until the swap is > not needed?**** > > **** > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Tony Graziano > *Sent:* Saturday, February 18, 2012 4:26 PM > *To:* Discussion list for users of sipXecs software > *Subject:* Re: [sipx-users] All phone registrations expiring**** > > **** > > You don't.**** > > On Feb 18, 2012 6:56 PM, "Ken Ridley" <[email protected]> wrote:**** > > Thanks for the help, Ram is on order, but how do I permanently remove/turn > off the swap?**** > > **** > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Tony Graziano > *Sent:* Saturday, February 11, 2012 2:39 PM > *To:* Discussion list for users of sipXecs software > *Subject:* Re: [sipx-users] All phone registrations expiring**** > > **** > > You should not be using any swap!**** > > On Feb 11, 2012 5:29 PM, "Ken Ridley" <[email protected]> wrote:**** > > This is the info I collected**** > > Shouldn’t it be using more of the swap?**** > > **** > > top - 14:02:47 up 3 days, 23:01, 1 user, load average: 1.17, 0.62, 0.38* > *** > > Tasks: 115 total, 3 running, 111 sleeping, 0 stopped, 1 zombie**** > > Cpu(s): 2.3%us, 1.0%sy, 0.0%ni, 96.4%id, 0.3%wa, 0.0%hi, 0.0%si, > 0.0%st**** > > Mem: 1294672k total, 1254548k used, 40124k free, 235340k buffers** > ** > > Swap: 6289436k total, 2212k used, 6287224k free, 461656k cached*** > * > > **** > > I also found no Fake registrations in the logs**** > > **** > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Tony Graziano > *Sent:* Friday, February 10, 2012 1:33 PM > *To:* Discussion list for users of sipXecs software > *Subject:* Re: [sipx-users] All phone registrations expiring**** > > **** > > it sounds as though it is a resource issue.**** > > **** > > look at top. are you using any swap? look in the registration logs for > "fake" registration attempts (hint: look at the log sizes for the previous > several days, if there is a larger file, then LOOK at that file). If these > are FAKE registrations (script or dos attack), address this at your > firewall.**** > > On Fri, Feb 10, 2012 at 4:23 PM, Ken Ridley <[email protected]> wrote:**** > > I Checked all of the messages I have received from this group, and I found > a thread about this issue, and it says to check the logs**** > > **** > > Is this the only option?**** > > If it is, what log do I check, and what am I looking for?**** > > **** > > This has happened twice on this system, rebooting it fixes the problem**** > > **** > > Thank you,**** > > * ***** > > *Ken Ridley***** > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/**** > > > > **** > > **** > > -- > ~~~~~~~~~~~~~~~~~~ > Tony Graziano, Manager > Telephone: 434.984.8430 > sip: [email protected] > Fax: 434.465.6833 > ~~~~~~~~~~~~~~~~~~ > Linked-In Profile: > http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 > Ask about our Internet Fax services! > ~~~~~~~~~~~~~~~~~~**** > > **** > > LAN/Telephony/Security and Control Systems Helpdesk:**** > > Telephone: 434.984.8426**** > > sip: [email protected]**** > > **** > > Helpdesk Customers: http://myhelp.myitdepartment.net**** > > Blog: http://blog.myitdepartment.net**** > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/**** > > **** > > LAN/Telephony/Security and Control Systems Helpdesk:**** > > Telephone: 434.984.8426**** > > sip: [email protected]**** > > **** > > Helpdesk Customers: http://myhelp.myitdepartment.net**** > > Blog: http://blog.myitdepartment.net**** > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/**** > > **** > > LAN/Telephony/Security and Control Systems Helpdesk:**** > > Telephone: 434.984.8426**** > > sip: [email protected]**** > > **** > > Helpdesk Customers: http://myhelp.myitdepartment.net**** > > Blog: http://blog.myitdepartment.net**** > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/**** > > ** ** > > LAN/Telephony/Security and Control Systems Helpdesk:**** > > Telephone: 434.984.8426**** > > sip: [email protected]**** > > ** ** > > Helpdesk Customers: http://myhelp.myitdepartment.net**** > > Blog: http://blog.myitdepartment.net**** > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- Michael Picher, Director of Technical Services eZuce, Inc. 300 Brickstone Square**** Suite 201**** Andover, MA. 01810 O.978-296-1005 X2015 M.207-956-0262 @mpicher <http://twitter.com/mpicher> www.ezuce.com ------------------------------------------------------------------------------------------------------------ Hope to see you at the sipX CoLab! http://www.sipfoundry.org/sipx-colab A gathering for - open source users, eZuce customers & eZuce partners Get the inside track on 4.6 and a glimpse at the future of sipXecs!
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
