Server can only have one NIC so this is a fail... What you're trying to do here really isn't that hard...
If you can't make it work, I'd suggest spending more time to learn about this stuff and make sure you have the proper hardware. Or seek help from somebody who can just set it up for you and make it work. Both of which may involve some $... But, there are only 2 ways to do things. Mike On Wed, Feb 29, 2012 at 7:01 AM, Steve <[email protected]> wrote: > This probably isn't specifically a sipx architecture question.. > > I've been having some issues with NAT, I've been able to get it to work > with one firewall (that's underpowered) but not pfsense. I've even gone > so far as to start from scratch going to v1x of pfsense and following > Tony's postings and importing pieces of Tony's sample config with no > success. I've even tried IPCOP with same results. > > So, I've decided to abandon the whole NAT thing and just move the server > to the DMZ. So my question is this, as I have 2 NIC's in my sipx server > can I just add the second IP to the server (for the DMZ public address) > and then also have the server plugged into the existing phone (non > routable) network? > > Essentially, my phones (all IP) would be completely segregated with no > access to the Internet or other networks. The sipx server would have a > connection on that network as they would obviously need to communicate > with the sipx server. > > Are there any issues with this config? Do the phones need any other > connectivity other than the sipx server, NTP for example? > > Thanks, > Steve > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- Michael Picher, Director of Technical Services eZuce, Inc. 300 Brickstone Square**** Suite 201**** Andover, MA. 01810 O.978-296-1005 X2015 M.207-956-0262 @mpicher <http://twitter.com/mpicher> www.ezuce.com ------------------------------------------------------------------------------------------------------------ Hope to see you at the sipX CoLab! http://www.sipfoundry.org/sipx-colab A gathering for - open source users, eZuce customers & eZuce partners Get the inside track on 4.6 and a glimpse at the future of sipXecs!
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
