Been running a Audio Codes MP-114 with 6.2.022.003 for some time now (Unmanaged) and have had no issues. This week I upgraded a Audio Codes Mediant 1000 from 6.00A.016.002 to 6.20A055.001. No complaints thus far.
From: [email protected] [mailto:[email protected]] On Behalf Of Tony Graziano Sent: Wednesday, April 04, 2012 11:37 AM To: Jason Mitchell; Discussion list for users of sipXecs software Subject: Re: [sipx-users] Mediant 1000 MSBG Don - How about a sanitized config for the wiki? On Wed, Apr 4, 2012 at 11:30 AM, Dave May <[email protected]<mailto:[email protected]>> wrote: Thanks for the response, Don. Do you have any specific guidance on what kinds of tweaking you had to perform, or what functional areas gave you the most trouble? Was your testing eventually successful? My starting point on this is to compare a base .ini file downloaded from the MSBG gateway, with a base .ini file generated by Sipxecs for the Mediant 1000 model. My hope is that this provides enough to get me going in the right direction, but any pointers would be appreciated. Dave. -----Original Message----- From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of McIlvin, Don Sent: Wednesday, April 04, 2012 11:13 AM To: Discussion list for users of sipXecs software Subject: Re: [sipx-users] Mediant 1000 MSBG I evaluated this last summer. We tested config as SipX-LAN-MSBG-Internet-ITSP. 6.0 was the first version w/SBC functionality. 6.2 fixed problems we encountered with 6.0. Haven't tested 6.4. Use 'unmanaged'. There will be a lot of parameter tweaking from defaults so I suggest you get used to the web admin interface. don -----Original Message----- From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Dave May Sent: Wednesday, April 04, 2012 10:04 AM To: [email protected]<mailto:[email protected]> Subject: [sipx-users] Mediant 1000 MSBG Is anybody using the Mediant 1000 MSBG with Sipxecs or openUC as a Managed Gateway? There is not an exact match for this particular model, what is the recommendation for setting one of these guys up under Sipxecs/openUC? Are there any benefits to managed vs unmanaged, other than generating the configuration file for you? Also, there are also no enums present for newer versions of the AudioCodes firmware (specifically 6.2 and 6.4). Has anybody tested with these versions, and are there any known benefits to either sticking with 6.0 or using the latest version of either 6.2 or 6.4? Thanks, Dave. _______________________________________________ sipx-users mailing list [email protected]<mailto:[email protected]> List Archive: http://list.sipfoundry.org/archive/sipx-users/ "The information in this electronic mail message is the sender's confidential business and may be legally privileged. It is intended solely for the addressee(s). Access to this internet electronic mail message by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it is prohibited and may be unlawful." "The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments." "In connection with representing sellers and/or buyers in real estate transactions, Coldwell Banker Residential Brokerage real estate sales associates have absolutely no authority to create binding contractual obligations on behalf of a seller or on behalf of a buyer via any written or verbal communications including, but not limited to email communications." [v1.0.07.109] _______________________________________________ sipx-users mailing list [email protected]<mailto:[email protected]> List Archive: http://list.sipfoundry.org/archive/sipx-users/ _______________________________________________ sipx-users mailing list [email protected]<mailto:[email protected]> List Archive: http://list.sipfoundry.org/archive/sipx-users/ -- ~~~~~~~~~~~~~~~~~~ Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected]<mailto:[email protected]> Fax: 434.465.6833 ~~~~~~~~~~~~~~~~~~ Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 Ask about our Internet Fax services! ~~~~~~~~~~~~~~~~~~ LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected]<mailto:[email protected]> Helpdesk Customers: http://myhelp.myitdepartment.net Blog: http://blog.myitdepartment.net
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
