did you do that? if so, did it fix it? On Fri, Apr 20, 2012 at 11:53 AM, Robert Schroeder < [email protected]> wrote:
> Tony,**** > > ** ** > > Thank you for the suggestion and for your help.**** > > ** ** > > Rob**** > > ** ** > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Tony Graziano > *Sent:* Friday, April 20, 2012 11:00 AM > > *To:* Discussion list for users of sipXecs software > *Subject:* Re: [sipx-users] Fax Problems (Big Time)**** > > ** ** > > Sorry, am not a audiocodes guru. I have documented the Patton PRi gateways > for use with t.38 in the wiki. Perhaps someone else would be so kind as to > do the same for an AC PRI gateway instead of keeping it a big secret and > make sure it is also documented on the wiki.**** > > ** ** > > Try:**** > > ** ** > > Configuration > Protocol Configuration > Protocol Definition > SIP General > Parameters**** > > Fax Signaling Method T.38 Relay**** > > Detect Fax on Answer Tone Initiate T.38 on Preamble**** > > SIP Transport Type UDP**** > > ** ** > > I don't know what the other settings are for Detect Fax on Answer Tone, > you really should address this before logging and tracing, because it > should have fax set for t.38 on the Mediant FIRST.**** > > ** ** > > For sanity, when you do find Nirvana, please post it here for someone to > update the wiki if you don't have a wiki account.**** > > ** ** > > On Fri, Apr 20, 2012 at 9:50 AM, Robert Schroeder < > [email protected]> wrote:**** > > Tony:**** > > **** > > I did find a Fax Signaling Method of T.38 Relay under the Coders And > Profile Definitions – IP Profile Settings - Gateway Parameters – Fax > Signaling Method.**** > > **** > > **** > > **** > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Tony Graziano > *Sent:* Friday, April 20, 2012 9:29 AM > *To:* Discussion list for users of sipXecs software > *Subject:* Re: [sipx-users] Fax Problems (Big Time)**** > > **** > > faxing into sipx only support t.38 and your audiocodes fax settings have > g711u. you need to change it to t.38.**** > > On Fri, Apr 20, 2012 at 9:17 AM, Robert Schroeder < > [email protected]> wrote:**** > > Has anyone had problems with faxing into sipXecs? We are having huge > problems with faxes being delivered to the users emails as zero page > tiff’s. It is not an every fax occurrence however it is at a rate that I am > no longer able to rely upon the faxing delivery capabilities of sipXecs. I > am trying to determine if the problems is with the AudioCodes, PRI Provider > or sipXecs.**** > > **** > > Just wondering if there is a known issue. I am running (4.4.0- > 2012-04-13EDT09:44:58 ip-10-72-10-163). I am also using three PRI circuits > with an AudioCodes Mediant 1000 SIP Gateway.**** > > **** > > Listed below is my current configuration settings on the AudioCodes!**** > > **** > > *AudioCodes Information***** > > Version ID: 6.00A.032.003**** > > DSP Type: 2**** > > DSP Software Version: 6008**** > > DSP Software Name: 624AE3**** > > Flash Version: 208**** > > **** > > AudioCodes Configuration – Media Settings – Fax/Modem/CID Settings**** > > **** > > *General Settings***** > > Fax Transport Mode: RelayEnable**** > > Caller ID Transport Type: Mute**** > > Caller ID Type: Standard Bellcore**** > > V.21 Modem Transport Type: Disable**** > > V.22 Modem Transport Type: Disable**** > > V.23 Modem Transport Type: Disable**** > > V.32 Modem Transport Type: Disable**** > > V.34 Modem Transport Type: Enable Bypass**** > > Fax CNG Mode: Disable**** > > CNG Detector Mode: Disable**** > > **** > > *Fax Relay Settings***** > > Fax Relay Redundancy Depth: 0**** > > Fax Relay Enhanced Redundancy Depth: 4**** > > Fax Relay ECM Enable: Enable**** > > Fax Relay Max Rate (bps): 9600bps**** > > **** > > *Bypass Settings***** > > Fax/Modem Bypass Coder Type: G711Mulaw**** > > Fax/Modem Bypass Packing Factor: 1**** > > Fax Bypass Output Gain: 0**** > > Modem Bypass Output Gain: 0**** > > **** > > Any suggestions from the techs would be very welcomed!**** > > **** > > Thanks Everyone,**** > > **** > > Rob Schroeder**** > > **** > ------------------------------ > > > NOTICE: This electronic mail message and any content within it are intended > exclusively for the individual(s) or > > entities to which it is addressed. The message, together with any attachments > and all other content, may contain > > confidential and/or privileged information. Any unauthorized review, use, > print, save, copy, disclosure or distribution > > is strictly prohibited. If you have received this message in error, please > immediately advise the sender by reply email > and delete all copies.**** > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/**** > > > > **** > > **** > > -- > ~~~~~~~~~~~~~~~~~~ > Tony Graziano, Manager > Telephone: 434.984.8430 > sip: [email protected] > Fax: 434.465.6833 > ~~~~~~~~~~~~~~~~~~ > Linked-In Profile: > http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 > Ask about our Internet Fax services! > ~~~~~~~~~~~~~~~~~~**** > > LAN/Telephony/Security and Control Systems Helpdesk:**** > > Telephone: 434.984.8426**** > > sip: [email protected]**** > > **** > > Helpdesk Customers: http://myhelp.myitdepartment.net**** > > Blog: http://blog.myitdepartment.net**** > > ** ** > > ** ** > ------------------------------ > > > NOTICE: This electronic mail message and any content within it are intended > exclusively for the individual(s) or > > entities to which it is addressed. The message, together with any attachments > and all other content, may contain > > confidential and/or privileged information. Any unauthorized review, use, > print, save, copy, disclosure or distribution > > is strictly prohibited. If you have received this message in error, please > immediately advise the sender by reply email > and delete all copies.**** > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/**** > > > > **** > > ** ** > > -- > ~~~~~~~~~~~~~~~~~~ > Tony Graziano, Manager > Telephone: 434.984.8430 > sip: [email protected] > Fax: 434.465.6833 > ~~~~~~~~~~~~~~~~~~ > Linked-In Profile: > http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 > Ask about our Internet Fax services! > ~~~~~~~~~~~~~~~~~~**** > > ** ** > > LAN/Telephony/Security and Control Systems Helpdesk:**** > > Telephone: 434.984.8426**** > > sip: [email protected]**** > > ** ** > > Helpdesk Customers: http://myhelp.myitdepartment.net**** > > Blog: http://blog.myitdepartment.net**** > > > ------------------------------ > > NOTICE: This electronic mail message and any content within it are intended > exclusively for the individual(s) or > > entities to which it is addressed. The message, together with any attachments > and all other content, may contain > > confidential and/or privileged information. Any unauthorized review, use, > print, save, copy, disclosure or distribution > > is strictly prohibited. If you have received this message in error, please > immediately advise the sender by reply email > and delete all copies. > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- ~~~~~~~~~~~~~~~~~~ Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected] Fax: 434.465.6833 ~~~~~~~~~~~~~~~~~~ Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 Ask about our Internet Fax services! ~~~~~~~~~~~~~~~~~~ -- LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Helpdesk Customers: http://myhelp.myitdepartment.net Blog: http://blog.myitdepartment.net
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
