Sipxbridge is more than capable of handling 24 simultaneous calls through a siptrunk if the hardware has decent specs ie...at least dual core and 8GB of ram.
We use Appia for all deployments. The load you noted here will be fine. they offer trunks with or without T1's. Your biggest question is what to use for your internet connection. If they will have 24 simultaneous calls your looking at about 2048 KB if using G.711U (86KB with payload plus overhead). Which means you will need to move to G.729 to fit your max call bandwidth inside a T1. -M >>> Tommy Laino <[email protected]> 07/03/12 12:21 PM >>> I am recommending a SipX to a customer. They are going to be converting from PRI to SIP trunking. They want to have 24 trunks available for calls. I am assuming that the internal SipX bridge is not going to be sufficient for the amount of calls that they are looking to handle. I am looking for recommendations from the forum for the best way to handle all 24 SIP trunks including best hardware and SIP providers for this deployment(I have used VoIP.ms and DIDLogic in the past). Any help is greatly appreciated. -- Tommy Laino Dome Technologies _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
