> Your biggest question is what to use for your internet connection. If they > will have 24 simultaneous calls your looking at about 2048 KB if using > G.711U (86KB with payload plus overhead). Which means you will need to > move to G.729 to fit your max call bandwidth inside a T1.
Appia told me all of their trunks are G.729 if I remember correctly. By the way, does anyone know what the total amount of bandwidth would be per G.729 channel with overhead? > -M > >>>> Tommy Laino <[email protected]> 07/03/12 12:21 PM >>> >>>> > > I am recommending a SipX to a customer. They are going to be > converting from PRI to SIP trunking. They want to have 24 > trunks available for calls. I am assuming that the internal > SipX bridge is not going to be sufficient for the amount of > calls that they are looking to handle. I am looking for > recommendations from the forum for the best way to handle > all 24 SIP trunks including best hardware and SIP providers > for this deployment(I have used VoIP.ms and DIDLogic in the > past). Any help is greatly appreciated. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
