Remove the ** 5060 ** port in the URI sent by VVX500 SUBSCRIBE sip:[email protected]:5060 SIP/2.0
On 09/25/2012 10:12 PM, Marand Remi wrote:
Hello, I can not obtain the MWI indication with a Polycom VVX500 Phone. SipXecs version : 4.4.0, Yum update is ok today. VVX 500 firmware : 4.0.2.11307 (last version i have found). The phone (172.28.1.12) SUBSCRIBE message to Sipxecs simple-message-summary service is always closed by SipX (pros0x.sip.prosodie = 172.28.1.10) with a 401 message. I send 2 pcap files, one with the VVX500 Subscription which fail and the same with a Polycom SP650 (172.28.1.6) on the same extension wich is ok. The differences in the SUBSCRIBE messages are very few, perhaps the URI inside the credential part.... i have tried different configurations in the MAC-sipx-phone.cfg, file, but there is not such things to try... Thanks for help. Best Regards. Rémi Marand - Directeur d'études / R&D Project Manager. --------------------------------------------------- PROSODIE - Direction de l'ingénierie de production. Tél. : +33 (0)1 46 84 12 77/ Mob. : +33 (0)6 87 72 53 25 Fax : +33 (0)1 41 10 94 94 e-mail : mailto:[email protected] --------------------------------------------------- www.prosodie.com _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
