Wait. I should clarify. I had a speeddial button - *76750. But, it didn't have presence enabled. Sorry. I will test that scenario though.
From: [email protected] [mailto:[email protected]] On Behalf Of Josh Patten Sent: Monday, October 15, 2012 5:48 PM To: Discussion list for users of sipXecs software Subject: Re: [sipx-users] 4.6: polycom and BLF The VVX1500 doesn't seem to support directed call pickup from a BLF button. Not sure why this is. On Mon, Oct 15, 2012 at 6:41 PM, Nathaniel Watkins <[email protected]> wrote: Correct - on my VVX1500, I don't see status updates (I am subscribed to presence). So I am unable to simply press the 'flashing button' to answer a ringing call. *78<ext> will pick up the call, but I cannot do it from the speed dial button. So in this scenario: Polycom 650 calls Polycom 650 VVX 1500 doesn't see the status of either extension - pressing the speed dial button of the extension being called simply initiates another call. From: [email protected] [mailto:[email protected]] On Behalf Of Todd Hodgen Sent: Monday, October 15, 2012 4:51 PM To: 'Discussion list for users of sipXecs software' Subject: Re: [sipx-users] 4.6: polycom and BLF Explain the scenario. Call ringing on a phone, and you want to do a directed call pickup from a button that has a speeddial button configured? From: [email protected] [mailto:[email protected]] On Behalf Of Nathaniel Watkins Sent: Monday, October 15, 2012 1:25 PM To: Discussion list for users of sipXecs software; George Niculae Subject: Re: [sipx-users] 4.6: polycom and BLF I have always had problems when attempting to retrieve a call via the speed dial button when using a VVX 1500. Does this work now as well? Nathaniel Watkins CIO DoTCom (Department of Technology & Communication) Garrett County Government/Board of Education 203 South 4th Street, Room 211 Oakland, MD 21550 Telephone: 301-334-5001 Fax: 301-334-7605 E-mail: [email protected] From: [email protected] [mailto:[email protected]] On Behalf Of Kumaran Sent: Monday, October 15, 2012 2:26 AM To: George Niculae Cc: Discussion list for users of sipXecs software Subject: Re: [sipx-users] 4.6: polycom and BLF I checked RLS which is working fine too...I can retrieve the call and monitor the call through speed dial button(stp) Regards, Kumaran T On 10/15/2012 11:22 AM, George Niculae wrote: Thanks, actually I was asking for RLS George On Monday, October 15, 2012, Kumaran <[email protected]> wrote: > On 10/12/2012 7:00 PM, George Niculae wrote: >> >> Hi All, >> >> anyone with polycom and 4.6 handy to give BLF a try? Don't know why >> yet but I cannot get buttons on TUI >> >> Thanks >> George >> > Hi George, > I checked SLA in latest build in Polycom which is working fine...I retrieve the call from any shared line phone... > > Regards, > Kumaran T > > _____ This message and any files transmitted with it are intended only for the individual(s) or entity named. If you are not the intended individual(s) or entity named you are hereby notified that any disclosure, copying, distribution or reliance upon its contents is strictly prohibited. If you have received this in error, please notify the sender, delete the original, and destroy all copies. Email transmissions cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. Garrett County Government therefore does not accept any liability for any errors or omissions in the contents of this message, which arise as a result of email transmission. Garrett County Government, 203 South Fourth Street, Courthouse, Oakland, Maryland 21550 www.garrettcounty.org _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/ -- Josh Patten eZuce Solutions Architect O.978-296-1005 X2050 M.979-574-5699 http://www.ezuce.com
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
