I don't think this jells completely with your description, but when you do a restart of a service, it does take some time for the restart and the services to work again. The sipxbridge is a good example, because it restarts, and then must re-register before you can make call on it.
Check on the wiki under sipxviewer. It is a utility you can run on your windows machine, or on the linux server to view traces. Do a search on the wiki for siptrace as well, I believe there are good instruction on how to do it there. You can google is as well - here is an article by our very own Mike Picher. http://www.sipfoundry.org/web/mpicher/~/426137/blogs/-/asset_publisher/xfZRF 9U0rLa7/blog/id/78163 From: [email protected] [mailto:[email protected]] On Behalf Of Henry Kwan Sent: Thursday, October 18, 2012 10:08 PM To: George Niculae; Discussion list for users of sipXecs software Subject: Re: [sipx-users] External calls cannot be transferred to voice mail (sipXecs 4.4.0) My installation was right from the 4.4 ISO. I did try without updating at all but to no avail. My ITSP is Primus Canada. Well I have to admit that I am not knowledgeable in setting up pfSense. In fact I am not knowledgeable on how to produce a pcap or produce a siptrace as Tony suggested. Having said that, I'll continue to play with 4.4 and look into how to perform the tasks suggested when time permits. In the mean time, 4.2.1 will have to suffice until I can figure out what I did wrong. By the way, my observation regarding the inconsistent behaviour on restarts for both 4.2.1 and 4.4.0 is not an attack on sipXecs. It is just that - an observation. Maybe someone can comment if this observation is also only experienced by me. If that's the case, I must be a jinx or have a unique ability to bring out the worst in sipXecs. Best regards to all, Henry Kwan _____ From: George Niculae <[email protected]> To: Discussion list for users of sipXecs software <[email protected]> Cc: Henry Kwan <[email protected]> Sent: Thursday, October 18, 2012 6:29:01 PM Subject: Re: [sipx-users] External calls cannot be transferred to voice mail (sipXecs 4.4.0) On Fri, Oct 19, 2012 at 3:26 AM, Tony Graziano <[email protected]> wrote: > Rather than use an old unsupportable version, produce a pcap from your > firewall or produce a siptrace from sipx itself. > > I don't think your off the cuff observation is exactly right on targetm . > Version 4.2 used its own media server while 4.4 uses FreeSWITCH and there > are significant close changes. > > You could also indicate whether or not you followed a tutorial on how to > properly configure pfsense and who the itsp is. > Additionally, if you could try scenario with 4.4 built from ISO, without yum updating to latest, and report back, will help identifying if issue in latest patches Thanks George
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
