Thanks Joegen for your advice, I shall do that.  I did not do that prior to 
taking on this endeavour because I did not know this technical detail.

As I stated in my previous posting/email on this subject, I am not an 
experienced sipXecs user nor SIP knowledgeable.  I hope that this forum will 
tolerate users with low technical subject matter knowledge, like me, to seek 
advices here such that these learning and experience building processes are fun 
and rewarding.

Should I am coming across as "barking on something on the system", please 
accept my apology as this was never my intention.  I was just trying to ask 
questions that I could not find answers after searching through various sources 
on the internet.

Again thank you to all generous advices and suggestions.

Best regard to all,

Henry Kwan





________________________________
 From: Joegen Baclor <[email protected]>
To: Discussion list for users of sipXecs software 
<[email protected]> 
Cc: Tony Graziano <[email protected]>; Henry Kwan <[email protected]> 
Sent: Thursday, October 18, 2012 11:50:15 PM
Subject: Re: [sipx-users] External calls cannot be transferred to voice mail 
(sipXecs 4.4.0)
 
Transferring ITSP originated calls requires that your ITSP supports 
INVITE without SDP.  Before barking on something on the system, check 
first if your ITSP supports this.  If not, there is no way your ITSP 
will work with sipx initiated transfers.


On 10/19/2012 01:19 PM, Tony Graziano wrote:
> On Fri, Oct 19, 2012 at 1:07 AM, Henry Kwan <[email protected]> wrote:
>> My installation was right from the 4.4 ISO.  I did try without updating at
>> all but to no avail.
>>
>> My ITSP is Primus Canada.
>>
>> Well I have to admit that I am not knowledgeable in setting up pfSense.  In
>> fact I am not knowledgeable on how to produce a pcap or produce a siptrace
>> as Tony suggested.  Having said that, I'll continue to play with 4.4 and
>> look into how to perform the tasks suggested when time permits.
>>
> Pfsense
> http://blog.myitdepartment.net/?p=297
>> In the mean time, 4.2.1 will have to suffice until I can figure out what I
>> did wrong.
>>
>> By the way, my observation regarding the inconsistent behaviour on restarts
>> for both 4.2.1 and 4.4.0 is not an attack on sipXecs.  It is just that - an
>> observation.  Maybe someone can comment if this observation is also only
>> experienced by me.  If that's the case, I must be a jinx or have a unique
>> ability to bring out the worst in sipXecs.
>>
> I can set up a new system each day and don't experience this behavior.
> It's really important to observe how much RAM you have installed (I
> prefer 8GB minimum but for very small installs 4GB on 4.4 is enough,
> though 8GB should be the minimum for 4.6).
>> Best regards to all,
>>
>> Henry Kwan
>>
>> ________________________________
>> From: George Niculae <[email protected]>
>>
>> To: Discussion list for users of sipXecs software
>> <[email protected]>
>> Cc: Henry Kwan <[email protected]>
>> Sent: Thursday, October 18, 2012 6:29:01 PM
>>
>> Subject: Re: [sipx-users] External calls cannot be transferred to voice mail
>> (sipXecs 4.4.0)
>>
>> On Fri, Oct 19, 2012 at 3:26 AM, Tony Graziano
>> <[email protected]> wrote:
>>> Rather than use an old unsupportable version, produce a pcap from your
>>> firewall or produce a siptrace from sipx itself.
>>>
>>> I don't think your off the cuff observation is exactly right on targetm .
>>> Version 4.2 used its own media server while 4.4 uses FreeSWITCH and there
>>> are significant close changes.
>>>
>>> You could also indicate whether or not you followed a tutorial on how to
>>> properly configure pfsense and who the itsp is.
>>>
>> Additionally, if you could try scenario with 4.4 built from ISO,
>> without yum updating to latest, and report back, will help identifying
>> if issue in latest patches
>>
>> Thanks
>> George
>>
>>
>>
>> _______________________________________________
>> sipx-users mailing list
>> [email protected]
>> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>
>
_______________________________________________
sipx-users mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users/

Reply via email to