The only service that runs on the .32 server is sipxsupervisor. No other services start...I'm new to 4.6 setup so if this is how it works then its fine.
This was a fresh install but I re-ran sipxecs-setup with options --verbose and --reset. I restarted the supervisor and on server 1 192.168.1.21 it lists the same error, "broken pipe". I found an old article relating to this exact error on 4.5.2 and I'm experiencing the same issues and Douglas Hubler stated then it was a bug and it should be resolved. There is no firewall or anything between server 1 .21 and now server 4 .32. .32 (secondary) shows its listening on 0.0.0.0:5308 and it has a connection established between 192.168.1.32:5308 and the first server on a high port. The Admin console still just reports: Configuration deployment10/19/12 9:51 AM10/19/12 9:51 AMFailedgfgwph.esgw.org:Error. System error for send: "Broken pipe". System error for send: "Broken pipe". System error for send: "Broken pipe". Authentication dialogue with 192.168.1.32 failed null Aaron Pursell Network Security Administrator Easter Seals-Goodwill Northern Rocky Mountain, Inc. 4400 Central Ave Great Falls, Montana 59405 (406) 771-3721 [email protected] >>> George Niculae <[email protected]> 10/19/2012 9:31 AM >>> On Fri, Oct 19, 2012 at 6:18 PM, Aaron Pursell <[email protected]> wrote: > On server 1 it reports: > > cf3> * Hailing 192.168.1.32 : 5308, with options "-v -K" (serial) > cf3> > ........................................................................... > cf3> No existing connection to 192.168.1.32 is established... > cf3> Set cfengine port number to 5308 = 5308 > cf3> Set connection timeout to 10 > cf3> -> Connect to 192.168.1.32 = 192.168.1.32 on port 5308 > cf3> -> Did not find new key format /etc/sipxpbx/.cfagent/ppkeys/sipx-.pub > cf3> -> Trying old style /etc/sipxpbx/.cfagent/ppkeys/sipx-192.168.1.32.pub > cf3> Couldn't send > cf3> !!! System error for send: "Broken pipe" > cf3> Couldn't send > cf3> !!! System error for send: "Broken pipe" > cf3> Couldn't send > cf3> !!! System error for send: "Broken pipe" > cf3> Challenge response from server 192.168.1.32/192.168.1.32 was incorrect! > cf3> I: Report relates to a promise with handle "" > cf3> I: Promise is made internally by cfengine > cf3> !! Authentication dialogue with 192.168.1.32 failed > cf3> Unable to establish connection with 192.168.1.32 > cf3> -> No suitable server responded to hail > cf3> CFEngine - autonomous configuration engine - commence self-diagnostic > prelude > > On server 2 nothing ever hits the log. Is 192.168.1.32 your secondary IP? Can you try service sipxsupervisor restart on second machine and see if it works after (is the 2nd machine configured from the first shot, or have you run sipxecs-setup more than once) Thanks George _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
