Ok did that and still fails but log shows: cf3> Initiate variable convergence... cf3> SET trustkey = 1 cf3> SET encrypt = 1 cf3> ........................................................................... cf3> * Hailing 192.168.1.32 : 5308, with options "-v -K" (serial) cf3> ........................................................................... cf3> No existing connection to 192.168.1.32 is established... cf3> Set cfengine port number to 5308 = 5308 cf3> Set connection timeout to 10 cf3> -> Connect to 192.168.1.32 = 192.168.1.32 on port 5308 cf3> !! Error connecting to server (timeout) cf3> !!! System error for connect: "Operation now in progress" cf3> !! Unable to connect to server 192.168.1.32 cf3> !!! System reports error for connect: "Operation now in progress" cf3> !! No server is responding on this port cf3> Unable to establish connection with 192.168.1.32 cf3> -> No suitable server responded to hail
Aaron Pursell Network Security Administrator Easter Seals-Goodwill Northern Rocky Mountain, Inc. 4400 Central Ave Great Falls, Montana 59405 (406) 771-3721 [email protected] >>> George Niculae <[email protected]> 10/19/2012 10:02 AM >>> On Fri, Oct 19, 2012 at 6:56 PM, Aaron Pursell <[email protected]> wrote: The only service that runs on the .32 server is sipxsupervisor. No other services start...I'm new to 4.6 setup so if this is how it works then its fine. This was a fresh install but I re-ran sipxecs-setup with options --verbose and --reset. Can you try removing server from config, readding it and running sipxecs-setup --reset-all on slave? George
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
