Applied.
Bernard Li wrote: > Actually... 2.05 didn't work... 2.08 does though. I have attached a > new patch. > > Thanks, > > Bernard > > ------------------------------------------------------------------------ > *From:* [EMAIL PROTECTED] on behalf of Bernard Li > *Sent:* Sat 23/07/2005 12:46 PM > *To:* Brian Elliott Finley; [EMAIL PROTECTED] > *Cc:* sisuite-devel@lists.sourceforge.net > *Subject:* RE: [Sisuite-devel] systemimager.spec patch > > Hi Brian: > > Andrea found that it does not work with 2.03 and I tested 2.05 and it > worked, so I think it is safe to assume that we need at least 2.05. I > have adjusted my patch accordingly and have attached it here again. > > Thanks, > > Bernard > > ------------------------------------------------------------------------ > *From:* [EMAIL PROTECTED] on behalf of Brian > Elliott Finley > *Sent:* Wed 20/07/2005 4:49 PM > *To:* [EMAIL PROTECTED] > *Cc:* sisuite-devel@lists.sourceforge.net > *Subject:* Re: [Sisuite-devel] systemimager.spec patch > > Thanks, Andrea, and Bernard, > > Attached is the Changelog from the perl-XML-Simple source. Any chance > you guys could have a look and see if you can tell how far back we can go? > > > > Andrea Righi wrote: > > > I've successfully tested si_monitor with perl-XML-Simple-2.12 (on a > > Mandrake 10.1) and unsuccessfully with perl-XML-Simple-1.08... so at > > least I think you can specify >=2.12.. > > > > Regards, > > -Andrea > > > > Bernard Li wrote: > > > >> Hey Brian: > >> > >> I am not sure when the 'ForceArray' functionality was introduced in > >> perl-XML-Simple, but as long as the dependency on the version is > >> correct, I have no problem with your modification. > >> > >> Thanks, > >> > >> Bernard > >> > >>> -----Original Message----- > >>> From: Brian Elliott Finley [mailto:[EMAIL PROTECTED] Sent: > >>> Wednesday, July 20, 2005 7:43 > >>> To: Bernard Li > >>> Cc: sisuite-devel@lists.sourceforge.net > >>> Subject: Re: [Sisuite-devel] systemimager.spec patch > >>> > >>> Bernard, > >>> > >>> With regard to perl-XML-Simple: > >>> > >>> * Is it possible to require perl-XML-Simple ">= 2" or ">= 2.00". > >>> SuSE 9.3, for example, is only on 2.12, while SuSE 9.0 is on > 2.08: > >>> o > >>> http://mirror.mcs.anl.gov/pub/suse/i386/9.3/suse/i586/perl-XML > >>> -Simple-2.12-3.i586.rpm > >>> o > >>> http://mirror.mcs.anl.gov/pub/suse/i386/9.0/suse/i586/perl-XML > >>> -Simple-2.08-39.i586.rpm > >>> > >>> > >>> > >>> Bernard Li wrote: > >>> > >>> > >>>> Hi guys: > >>>> > >>>> The attached patch mainly adds new RPM dependencies from si_monitor, > >>>> also added %configure command (I thought this was necessary, but was > >>>> not in Erich's spec file, not sure if it's required...?) > >>>> > >>>> Summary from my changelog: > >>>> > >>>> - Updated Copyright -> License (deprecated) > >>>> - Added %configure command > >>>> - Added requirement for perl-TermReadKey > >>>> - Updated requirement for perl-XML-Simple to >= 2.14 > >>>> > >>>> Thanks, > >>>> > >>>> Bernard > >>>> > >>>> ------------------------------------------------------------- > >>> > >>> > >>> ----------- > >>> > >>>> Index: systemimager.spec > >>>> =================================================================== > >>>> --- systemimager.spec (revision 3192) > >>>> +++ systemimager.spec (working copy) > >>>> @@ -15,7 +15,7 @@ > >>>> Name: %name > >>>> Version: %ver > >>>> Release: %rel > >>>> -Copyright: GPL > >>>> +License: GPL > >>>> Group: Applications/System > >>>> Source0: > >>> > >>> > >>> http://download.sourceforge.net/systemimager/%{name}-%{ver}.tar.bz2 > >>> > >>>> BuildRoot: /tmp/%{name}-%{ver}-root > >>>> @@ -35,13 +35,13 @@ > >>>> Summary: Software that automates Linux installs, software > >>> > >>> > >>> distribution, and production deployment. > >>> > >>>> Version: %ver > >>>> Release: %rel > >>>> -Copyright: GPL > >>>> +License: GPL > >>>> Group: Applications/System > >>>> BuildRoot: /tmp/%{name}-%{ver}-root > >>>> Packager: dann frazier <[EMAIL PROTECTED]> > >>>> URL: http://systemimager.org/ > >>>> Distribution: System Installation Suite > >>>> -Requires: rsync >= 2.4.6, systemimager-common = %{version}, > >>> > >>> > >>> perl-AppConfig, dosfstools, /sbin/chkconfig, perl, perl-XML-Simple > >>> > >>>> +Requires: rsync >= 2.4.6, systemimager-common = %{version}, > >>> > >>> > >>> perl-AppConfig, dosfstools, /sbin/chkconfig, perl, perl-XML-Simple > >>> >= 2.14, perl-TermReadKey > >>> > >>>> AutoReqProv: no > >>>> > >>>> %description server > >>>> @@ -66,7 +66,7 @@ > >>>> Summary: Software that automates Linux installs, software > >>> > >>> > >>> distribution, and production deployment. > >>> > >>>> Version: %ver > >>>> Release: %rel > >>>> -Copyright: GPL > >>>> +License: GPL > >>>> Group: Applications/System > >>>> BuildRoot: /tmp/%{name}-%{ver}-root > >>>> Packager: dann frazier <[EMAIL PROTECTED]> > >>>> @@ -97,7 +97,7 @@ > >>>> Summary: Software that automates Linux installs, software > >>> > >>> > >>> distribution, and production deployment. > >>> > >>>> Version: %ver > >>>> Release: %rel > >>>> -Copyright: GPL > >>>> +License: GPL > >>>> Group: Applications/System > >>>> BuildRoot: /tmp/%{name}-%{ver}-root > >>>> Packager: dann frazier <[EMAIL PROTECTED]> > >>>> @@ -128,7 +128,7 @@ > >>>> Summary: Software that automates Linux installs, software > >>> > >>> > >>> distribution, and production deployment. > >>> > >>>> Version: %ver > >>>> Release: %rel > >>>> -Copyright: GPL > >>>> +License: GPL > >>>> Group: Applications/System > >>>> BuildRoot: /tmp/%{name}-%{ver}-root > >>>> Packager: dann frazier <[EMAIL PROTECTED]> > >>>> @@ -161,7 +161,7 @@ > >>>> Summary: Software that automates Linux installs, software > >>> > >>> > >>> distribution, and production deployment. > >>> > >>>> Version: %ver > >>>> Release: %rel > >>>> -Copyright: GPL > >>>> +License: GPL > >>>> Group: Applications/System > >>>> BuildRoot: /tmp/%{name}-%{ver}-root > >>>> Packager: dann frazier <[EMAIL PROTECTED]> > >>>> @@ -191,6 +191,12 @@ > >>>> process. > >>>> > >>>> %changelog > >>>> +* Wed Jul 20 2005 Bernard Li <[EMAIL PROTECTED]> > >>>> +- Updated Copyright -> License (deprecated) > >>>> +- Added %configure command > >>>> +- Added requirement for perl-TermReadKey > >>>> +- Updated requirement for perl-XML-Simple to >= 2.14 > >>>> + > >>>> * Sun Dec 19 2004 Josh Aas <[EMAIL PROTECTED]> > >>>> - Here is another patch for RPM building. With this patch, > >>> > >>> > >>> you should be > >>> > >>>> able to make an srpm, install it, build from the spec > >>> > >>> > >>> file ("rpmbuild > >>> > >>>> @@ -301,6 +307,8 @@ > >>>> %prep > >>>> %setup -q > >>>> > >>>> +%configure > >>>> + > >>>> make -j11 get_source > >>>> > >>>> # Only build everything if on x86, this helps with PPC build issues > >>>> > >>>> > >>> > >>> -- > >>> ------------------------------------------------------ > >>> Brian Elliott Finley Mobile: 630.631.6621 > >>> gpg --keyserver wwwkeys.pgp.net --recv-keys 10F8EE52 > >>> ------------------------------------------------------ > >>> > >>> > >> > >> > >> > >> ------------------------------------------------------- > >> SF.Net email is sponsored by: Discover Easy Linux Migration Strategies > >> from IBM. Find simple to follow Roadmaps, straightforward articles, > >> informative Webcasts and more! Get everything you need to get up to > >> speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id > <http://ads.osdn.com/?ad_idt77&alloc_id>492&op=click > >> _______________________________________________ > >> Sisuite-devel mailing list > >> Sisuite-devel@lists.sourceforge.net > >> https://lists.sourceforge.net/lists/listinfo/sisuite-devel > >> > > > > > > ------------------------------------------------------- > > SF.Net email is sponsored by: Discover Easy Linux Migration Strategies > > from IBM. Find simple to follow Roadmaps, straightforward articles, > > informative Webcasts and more! Get everything you need to get up to > > speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click > <http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click> > > _______________________________________________ > > Sisuite-devel mailing list > > Sisuite-devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/sisuite-devel > > > > > > -- > ------------------------------------------------------ > Brian Elliott Finley Mobile: 630.631.6621 > gpg --keyserver wwwkeys.pgp.net --recv-keys 10F8EE52 > ------------------------------------------------------ > >------------------------------------------------------------------------ > >Index: systemimager.spec >=================================================================== >--- systemimager.spec (revision 3196) >+++ systemimager.spec (working copy) >@@ -15,7 +15,7 @@ > Name: %name > Version: %ver > Release: %rel >-Copyright: GPL >+License: GPL > Group: Applications/System > Source0: http://download.sourceforge.net/systemimager/%{name}-%{ver}.tar.bz2 > BuildRoot: /tmp/%{name}-%{ver}-root >@@ -35,13 +35,13 @@ > Summary: Software that automates Linux installs, software distribution, and > production deployment. > Version: %ver > Release: %rel >-Copyright: GPL >+License: GPL > Group: Applications/System > BuildRoot: /tmp/%{name}-%{ver}-root > Packager: dann frazier <[EMAIL PROTECTED]> > URL: http://systemimager.org/ > Distribution: System Installation Suite >-Requires: rsync >= 2.4.6, systemimager-common = %{version}, perl-AppConfig, >dosfstools, /sbin/chkconfig, perl, perl-XML-Simple >+Requires: rsync >= 2.4.6, systemimager-common = %{version}, perl-AppConfig, >dosfstools, /sbin/chkconfig, perl, perl-XML-Simple >= 2.08, perl-TermReadKey > AutoReqProv: no > > %description server >@@ -66,7 +66,7 @@ > Summary: Software that automates Linux installs, software distribution, and > production deployment. > Version: %ver > Release: %rel >-Copyright: GPL >+License: GPL > Group: Applications/System > BuildRoot: /tmp/%{name}-%{ver}-root > Packager: dann frazier <[EMAIL PROTECTED]> >@@ -97,7 +97,7 @@ > Summary: Software that automates Linux installs, software distribution, and > production deployment. > Version: %ver > Release: %rel >-Copyright: GPL >+License: GPL > Group: Applications/System > BuildRoot: /tmp/%{name}-%{ver}-root > Packager: dann frazier <[EMAIL PROTECTED]> >@@ -128,7 +128,7 @@ > Summary: Software that automates Linux installs, software distribution, and > production deployment. > Version: %ver > Release: %rel >-Copyright: GPL >+License: GPL > Group: Applications/System > BuildRoot: /tmp/%{name}-%{ver}-root > Packager: dann frazier <[EMAIL PROTECTED]> >@@ -161,7 +161,7 @@ > Summary: Software that automates Linux installs, software distribution, and > production deployment. > Version: %ver > Release: %rel >-Copyright: GPL >+License: GPL > Group: Applications/System > BuildRoot: /tmp/%{name}-%{ver}-root > Packager: dann frazier <[EMAIL PROTECTED]> >@@ -191,6 +191,11 @@ > process. > > %changelog >+* Sat Jul 23 2005 Bernard Li <[EMAIL PROTECTED]> >+- Updated Copyright -> License (deprecated) >+- Added requirement for perl-TermReadKey >+- Updated requirement for perl-XML-Simple to >= 2.08 >+ > * Sun Dec 19 2004 Josh Aas <[EMAIL PROTECTED]> > - Here is another patch for RPM building. With this patch, you should be > able to make an srpm, install it, build from the spec file ("rpmbuild > > -- ------------------------------------------------------ Brian Elliott Finley Mobile: 630.631.6621 gpg --keyserver wwwkeys.pgp.net --recv-keys 10F8EE52 ------------------------------------------------------ ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click _______________________________________________ Sisuite-devel mailing list Sisuite-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sisuite-devel
