From: Brian Elliott Finley [mailto:[EMAIL PROTECTED]
Sent: Mon 25/07/2005 13:17
To: Bernard Li
Cc: [EMAIL PROTECTED]; sisuite-devel@lists.sourceforge.net
Subject: Re: [Sisuite-devel] systemimager.spec patch
Applied.
Bernard Li wrote:
>
Actually... 2.05 didn't work... 2.08 does though. I have
attached a
> new patch.
>
>
Thanks,
>
> Bernard
>
>
------------------------------------------------------------------------
>
*From:* [EMAIL PROTECTED] on behalf of Bernard
Li
> *Sent:* Sat 23/07/2005 12:46 PM
> *To:* Brian Elliott Finley;
[EMAIL PROTECTED]
> *Cc:* sisuite-devel@lists.sourceforge.net
>
*Subject:* RE: [Sisuite-devel] systemimager.spec patch
>
> Hi
Brian:
>
> Andrea found that it does not work with 2.03 and I
tested 2.05 and it
> worked, so I think it is safe to assume that we need
at least 2.05. I
> have adjusted my patch accordingly and have
attached it here again.
>
> Thanks,
>
>
Bernard
>
>
------------------------------------------------------------------------
>
*From:* [EMAIL PROTECTED] on behalf of Brian
>
Elliott Finley
> *Sent:* Wed 20/07/2005 4:49 PM
> *To:*
[EMAIL PROTECTED]
> *Cc:* sisuite-devel@lists.sourceforge.net
>
*Subject:* Re: [Sisuite-devel] systemimager.spec patch
>
> Thanks,
Andrea, and Bernard,
>
> Attached is the Changelog from the
perl-XML-Simple source. Any chance
> you guys could have a look and
see if you can tell how far back we can go?
>
>
>
>
Andrea Righi wrote:
>
> > I've successfully tested si_monitor
with perl-XML-Simple-2.12 (on a
> > Mandrake 10.1) and unsuccessfully
with perl-XML-Simple-1.08... so at
> > least I think you can specify
>=2.12..
> >
> > Regards,
> > -Andrea
>
>
> > Bernard Li wrote:
> >
> >> Hey
Brian:
> >>
> >> I am not sure when the 'ForceArray'
functionality was introduced in
> >> perl-XML-Simple, but as long as
the dependency on the version is
> >> correct, I have no problem
with your modification.
> >>
> >> Thanks,
>
>>
> >> Bernard
> >>
> >>>
-----Original Message-----
> >>> From: Brian Elliott Finley [mailto:[EMAIL PROTECTED]]
Sent:
> >>> Wednesday, July 20, 2005 7:43
> >>>
To: Bernard Li
> >>> Cc:
sisuite-devel@lists.sourceforge.net
> >>> Subject: Re:
[Sisuite-devel] systemimager.spec patch
> >>>
>
>>> Bernard,
> >>>
> >>> With regard to
perl-XML-Simple:
> >>>
> >>> *
Is it possible to require perl-XML-Simple ">= 2" or ">= 2.00".
>
>>> SuSE 9.3, for example, is only on
2.12, while SuSE 9.0 is on
> 2.08:
>
>>> o
>
>>> http://mirror.mcs.anl.gov/pub/suse/i386/9.3/suse/i586/perl-XML
>
>>> -Simple-2.12-3.i586.rpm
>
>>> o
>
>>> http://mirror.mcs.anl.gov/pub/suse/i386/9.0/suse/i586/perl-XML
>
>>> -Simple-2.08-39.i586.rpm
> >>>
>
>>>
> >>>
> >>> Bernard Li wrote:
>
>>>
> >>>
> >>>> Hi guys:
>
>>>>
> >>>> The attached patch mainly adds new RPM
dependencies from si_monitor,
> >>>> also added %configure
command (I thought this was necessary, but was
> >>>> not in
Erich's spec file, not sure if it's required...?)
>
>>>>
> >>>> Summary from my changelog:
>
>>>>
> >>>> - Updated Copyright -> License
(deprecated)
> >>>> - Added %configure command
>
>>>> - Added requirement for perl-TermReadKey
>
>>>> - Updated requirement for perl-XML-Simple to >= 2.14
>
>>>>
> >>>> Thanks,
>
>>>>
> >>>> Bernard
>
>>>>
> >>>>
-------------------------------------------------------------
>
>>>
> >>>
> >>> -----------
>
>>>
> >>>> Index: systemimager.spec
>
>>>>
===================================================================
>
>>>> --- systemimager.spec (revision 3192)
>
>>>> +++ systemimager.spec (working copy)
>
>>>> @@ -15,7 +15,7 @@
> >>>> Name: %name
>
>>>> Version: %ver
> >>>> Release: %rel
>
>>>> -Copyright: GPL
> >>>> +License: GPL
>
>>>> Group: Applications/System
> >>>>
Source0:
> >>>
> >>>
> >>> http://download.sourceforge.net/systemimager/%{name}-%{ver}.tar.bz2
>
>>>
> >>>> BuildRoot:
/tmp/%{name}-%{ver}-root
> >>>> @@ -35,13 +35,13 @@
>
>>>> Summary: Software that automates Linux installs,
software
> >>>
> >>>
> >>>
distribution, and production deployment.
> >>>
>
>>>> Version: %ver
> >>>> Release: %rel
>
>>>> -Copyright: GPL
> >>>> +License: GPL
>
>>>> Group: Applications/System
> >>>> BuildRoot:
/tmp/%{name}-%{ver}-root
> >>>> Packager: dann frazier
<[EMAIL PROTECTED]>
> >>>> URL: http://systemimager.org/
>
>>>> Distribution: System Installation Suite
>
>>>> -Requires: rsync >= 2.4.6, systemimager-common =
%{version},
> >>>
> >>>
> >>>
perl-AppConfig, dosfstools, /sbin/chkconfig, perl, perl-XML-Simple
>
>>>
> >>>> +Requires: rsync >= 2.4.6,
systemimager-common = %{version},
> >>>
>
>>>
> >>> perl-AppConfig, dosfstools, /sbin/chkconfig,
perl, perl-XML-Simple
> >>> >= 2.14, perl-TermReadKey
>
>>>
> >>>> AutoReqProv: no
>
>>>>
> >>>> %description server
>
>>>> @@ -66,7 +66,7 @@
> >>>> Summary: Software
that automates Linux installs, software
> >>>
>
>>>
> >>> distribution, and production
deployment.
> >>>
> >>>> Version: %ver
>
>>>> Release: %rel
> >>>> -Copyright: GPL
>
>>>> +License: GPL
> >>>> Group:
Applications/System
> >>>> BuildRoot:
/tmp/%{name}-%{ver}-root
> >>>> Packager: dann frazier
<[EMAIL PROTECTED]>
> >>>> @@ -97,7 +97,7 @@
>
>>>> Summary: Software that automates Linux installs,
software
> >>>
> >>>
> >>>
distribution, and production deployment.
> >>>
>
>>>> Version: %ver
> >>>> Release: %rel
>
>>>> -Copyright: GPL
> >>>> +License: GPL
>
>>>> Group: Applications/System
> >>>> BuildRoot:
/tmp/%{name}-%{ver}-root
> >>>> Packager: dann frazier
<[EMAIL PROTECTED]>
> >>>> @@ -128,7 +128,7 @@
>
>>>> Summary: Software that automates Linux installs,
software
> >>>
> >>>
> >>>
distribution, and production deployment.
> >>>
>
>>>> Version: %ver
> >>>> Release: %rel
>
>>>> -Copyright: GPL
> >>>> +License: GPL
>
>>>> Group: Applications/System
> >>>> BuildRoot:
/tmp/%{name}-%{ver}-root
> >>>> Packager: dann frazier
<[EMAIL PROTECTED]>
> >>>> @@ -161,7 +161,7 @@
>
>>>> Summary: Software that automates Linux installs,
software
> >>>
> >>>
> >>>
distribution, and production deployment.
> >>>
>
>>>> Version: %ver
> >>>> Release: %rel
>
>>>> -Copyright: GPL
> >>>> +License: GPL
>
>>>> Group: Applications/System
> >>>> BuildRoot:
/tmp/%{name}-%{ver}-root
> >>>> Packager: dann frazier
<[EMAIL PROTECTED]>
> >>>> @@ -191,6 +191,12 @@
>
>>>> process.
> >>>>
> >>>>
%changelog
> >>>> +* Wed Jul 20 2005 Bernard Li
<[EMAIL PROTECTED]>
> >>>> +- Updated Copyright -> License
(deprecated)
> >>>> +- Added %configure command
>
>>>> +- Added requirement for perl-TermReadKey
>
>>>> +- Updated requirement for perl-XML-Simple to >=
2.14
> >>>> +
> >>>> * Sun Dec 19 2004 Josh
Aas <[EMAIL PROTECTED]>
> >>>> - Here is another patch for
RPM building. With this patch,
> >>>
> >>>
>
>>> you should be
> >>>
> >>>>
able to make an srpm, install it, build from the spec
>
>>>
> >>>
> >>> file ("rpmbuild
>
>>>
> >>>> @@ -301,6 +307,8 @@
>
>>>> %prep
> >>>> %setup -q
>
>>>>
> >>>> +%configure
> >>>>
+
> >>>> make -j11 get_source
> >>>>
>
>>>> # Only build everything if on x86, this helps with PPC build
issues
> >>>>
> >>>>
>
>>>
> >>> --
> >>>
------------------------------------------------------
> >>>
Brian Elliott Finley
Mobile: 630.631.6621
> >>> gpg --keyserver wwwkeys.pgp.net
--recv-keys 10F8EE52
> >>>
------------------------------------------------------
>
>>>
> >>>
> >>
> >>
>
>>
> >>
-------------------------------------------------------
> >> SF.Net
email is sponsored by: Discover Easy Linux Migration Strategies
> >>
from IBM. Find simple to follow Roadmaps, straightforward articles,
>
>> informative Webcasts and more! Get everything you need to get up
to
> >> speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id
>
<http://ads.osdn.com/?ad_idt77&alloc_id>492&op=click
>
>> _______________________________________________
> >>
Sisuite-devel mailing list
> >>
Sisuite-devel@lists.sourceforge.net
> >> https://lists.sourceforge.net/lists/listinfo/sisuite-devel
>
>>
> >
> >
> >
-------------------------------------------------------
> > SF.Net
email is sponsored by: Discover Easy Linux Migration Strategies
> >
from IBM. Find simple to follow Roadmaps, straightforward articles,
> >
informative Webcasts and more! Get everything you need to get up to
> >
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
>
<http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click>
>
> _______________________________________________
> > Sisuite-devel
mailing list
> > Sisuite-devel@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/sisuite-devel
>
>
> >
>
> --
>
------------------------------------------------------
> Brian
Elliott Finley
Mobile: 630.631.6621
> gpg --keyserver wwwkeys.pgp.net
--recv-keys 10F8EE52
>
------------------------------------------------------
>
>------------------------------------------------------------------------
>
>Index:
systemimager.spec
>===================================================================
>---
systemimager.spec (revision 3196)
>+++ systemimager.spec
(working copy)
>@@ -15,7 +15,7 @@
> Name: %name
> Version:
%ver
> Release: %rel
>-Copyright: GPL
>+License: GPL
>
Group: Applications/System
> Source0: http://download.sourceforge.net/systemimager/%{name}-%{ver}.tar.bz2
>
BuildRoot: /tmp/%{name}-%{ver}-root
>@@ -35,13 +35,13 @@
> Summary:
Software that automates Linux installs, software distribution, and production
deployment.
> Version: %ver
> Release: %rel
>-Copyright:
GPL
>+License: GPL
> Group: Applications/System
> BuildRoot:
/tmp/%{name}-%{ver}-root
> Packager: dann frazier
<[EMAIL PROTECTED]>
> URL: http://systemimager.org/
>
Distribution: System Installation Suite
>-Requires: rsync >= 2.4.6,
systemimager-common = %{version}, perl-AppConfig, dosfstools, /sbin/chkconfig,
perl, perl-XML-Simple
>+Requires: rsync >= 2.4.6, systemimager-common =
%{version}, perl-AppConfig, dosfstools, /sbin/chkconfig, perl, perl-XML-Simple
>= 2.08, perl-TermReadKey
> AutoReqProv: no
>
>
%description server
>@@ -66,7 +66,7 @@
> Summary: Software that
automates Linux installs, software distribution, and production
deployment.
> Version: %ver
> Release: %rel
>-Copyright:
GPL
>+License: GPL
> Group: Applications/System
> BuildRoot:
/tmp/%{name}-%{ver}-root
> Packager: dann frazier
<[EMAIL PROTECTED]>
>@@ -97,7 +97,7 @@
> Summary: Software that
automates Linux installs, software distribution, and production
deployment.
> Version: %ver
> Release: %rel
>-Copyright:
GPL
>+License: GPL
> Group: Applications/System
> BuildRoot:
/tmp/%{name}-%{ver}-root
> Packager: dann frazier
<[EMAIL PROTECTED]>
>@@ -128,7 +128,7 @@
> Summary: Software
that automates Linux installs, software distribution, and production
deployment.
> Version: %ver
> Release: %rel
>-Copyright:
GPL
>+License: GPL
> Group: Applications/System
> BuildRoot:
/tmp/%{name}-%{ver}-root
> Packager: dann frazier
<[EMAIL PROTECTED]>
>@@ -161,7 +161,7 @@
> Summary: Software
that automates Linux installs, software distribution, and production
deployment.
> Version: %ver
> Release: %rel
>-Copyright:
GPL
>+License: GPL
> Group: Applications/System
> BuildRoot:
/tmp/%{name}-%{ver}-root
> Packager: dann frazier
<[EMAIL PROTECTED]>
>@@ -191,6 +191,11 @@
>
process.
>
> %changelog
>+* Sat Jul 23 2005 Bernard Li
<[EMAIL PROTECTED]>
>+- Updated Copyright -> License
(deprecated)
>+- Added requirement for perl-TermReadKey
>+- Updated
requirement for perl-XML-Simple to >= 2.08
>+
> * Sun Dec 19 2004
Josh Aas <[EMAIL PROTECTED]>
> - Here is another patch for RPM building.
With this patch, you should be
> able to make an srpm, install
it, build from the spec file
("rpmbuild
>
>
--
------------------------------------------------------
Brian
Elliott Finley
Mobile: 630.631.6621
gpg --keyserver wwwkeys.pgp.net --recv-keys
10F8EE52
------------------------------------------------------
Index: systemimager.spec =================================================================== --- systemimager.spec (revision 3197) +++ systemimager.spec (working copy) @@ -191,6 +191,9 @@ process. %changelog +* Mon Jul 25 2005 Bernard Li <[EMAIL PROTECTED]> +- Added directory /var/lock/systemimager + * Sat Jul 23 2005 Bernard Li <[EMAIL PROTECTED]> - Updated Copyright -> License (deprecated) - Added requirement for perl-TermReadKey @@ -490,6 +493,7 @@ # These should move to a files doc section, because they are missing if you don't do doc # %doc doc/manual/systemimager* doc/manual/html doc/manual/examples %doc doc/man/autoinstall* doc/examples/local.cfg +%dir /var/lock/systemimager %dir /var/log/systemimager %dir /var/lib/systemimager/images %dir /var/lib/systemimager/scripts/pre-install
