I think you can try systemimager3.0.0-1 rpm package. The e1000.o module is included in the initrd.img. And it will be loaded without sys's hardware check. Or you can manually add it to initrd.img. BTW: I can't build it from source on RH EL2.9, it breaks at jfsutil, while I succeed on RH7.3.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sobiesiak, Rony Sent: Wednesday, November 19, 2003 1:23 AM To: [EMAIL PROTECTED] Subject: RE: [Sisuite-users] where can i find e1000.o hi dann, thanx for the reply. this afternoon i dir download the 3.0.1 sources and tried a "make all" which ended in a lot of errormessages (remember this is done on a suse 9.0 distribution). should it be necessary go this road any further i will provide you with the details . but for now: triggerd by the phrase "newer driver" in your message i tried to use one of the "unstable" versions (3.1.5) of the boot package. this brought up the same messages. are there any boot switches i could try to use to make the boel-kernel detect the e1000 ?? the current layout of the APPEND= line in the pxelinux config file is: APPEND vga=extended load_ramdisk=1 prompt_ramdisk=0 initrd=initrd.img.7 root=/dev/ram rw ramdisk_blocksize=4096 Rony Sobiesiak -----Original Message----- From: dann frazier [mailto:[EMAIL PROTECTED] Sent: Tue 11/18/2003 4:49 PM To: [EMAIL PROTECTED] Cc: Subject: Re: [Sisuite-users] where can i find e1000.o On Tue, Nov 18, 2003 at 09:20:56AM +0100, Sobiesiak wrote: > hi, > I'm currently trying to use SytemImager 3.01 on a set of dual-processor > athlon board , each equipped with two on board e1000 network cards. > The boot process uses pxelinux. > the Boel kernel loads succesfully , but finally the startup terminates > since dhclient cant acces my e1000 interfaces. dhclient trys to get its > adress from the loopback device !. [EMAIL PROTECTED]:~$ grep E1000 /home/dannf/cvs/systemimager-3.0.x/patches/linux.i386.config CONFIG_E1000=y it is already included statically - maybe you need a newer driver? > Ifconfig also only reports lo , no e1000. > where can i find a e1000.o module that could be put into the > my_modules directory of the initrd ??? > or do i have to get the whole sourcecode ??? if you need a newer driver, you'll need to rebuild the kernel & boel_binaries. instructions are in the FAQ in the manual. ------------------------------------------------------- This SF. Net email is sponsored by: GoToMyPC GoToMyPC is the fast, easy and secure way to access your computer from any Web browser or wireless device. Click here to Try it Free! https://www.gotomypc.com/tr/OSDN/AW/Q4_2003/t/g22lp?Target=mm/g22lp.tmpl _______________________________________________ Sisuite-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/sisuite-users ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ Sisuite-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/sisuite-users ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ Sisuite-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/sisuite-users
