From: [EMAIL PROTECTED] on behalf of Nicholas Harknett
Sent: Wed 8/4/2004 10:54 AM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: [Sisuite-users] SATA Support
Hello,
I am doing system-imaging on Dell poweredge
750s and I have been struggling getting SATA support for the kernel I boot to
via pxeboot for a systemimager autoinstall. I built the kernel using the
existing config file in /usr/share/systemimager. I used this config fil
eon the 2.4.26 kernel and built it. I extracted the bzImage kernel file
from the directory structure and replaced /tftboot/kernel with the file, (after
applying patches and building) and it boots, but I get to a point where I get
the message:
cannot stat /dev/sda
I get some more
complaints and then it says my autoinstall failed. I checked and I cannot
hit /dev/sda or /dev/hda or anything of the sort when the system is
booted.
Has anybody seen anything similar in their endeavors, or has
anybody had any success getting serial ATA support to work for the systemimager
boot?
Thanks,
Nick
Harknett
-------------------------------------------------------
This
SF.Net email is sponsored by OSTG. Have you noticed the changes on
Linux.com,
ITManagersJournal and NewsForge in the past few weeks? Now,
one more big
change to announce. We are now OSTG- Open Source Technology
Group. Come see
the changes on the new OSTG site.
www.ostg.com
_______________________________________________
Sisuite-users
mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/sisuite-users
