Hello all, I have a new version of my kernel out. This kernel has support for:
- SATA devices. - all SCSI devices now selected (Megaraid2, IBM, Compaq, etc.). - newer e1000 driver. - newer bcm5700 (aka tg3) driver. - all network devices selected. I recently had to try installing SI to a Dell PowerEdge 2850 and ran into some of the same problems that Mariano Guelar ran into with his PE1850. Upgrading my kernel and using a base of 3.4.1 seemed to have done the trick, or at least it did for me on my PE2850 server. You can get my files here: http://world.anarchy.com/~peter/systemimager/ You will most likely need to be using SI-3.4.1 to make this work, but maybe not. Most users need simply burn the si341.iso file to CD and boot their clients with it. Power users w/ PXE can simply install the kernel file to their /tftpboot directory. (If you are cloning lots of machines this is almost a requirement. Check out the Niflheim PXE-HOWTO-WITH-SYSTEMIMAGER now referenced here http://baldguysoftware.com/pub/www.systemimager.org.dev/news/2002.09.18_NIFLH EIM_Cluster_Uses_SystemImager.pdf) Note that my kernel makes no consideration for fitting on a floppy; just the kernel is bigger than the floppy capacity! The goal of this kernel is to make things work, not worry about using outdated mediums :). Regards, Peter Mueller Operations Engineer (408)235-1700 x125 Find travel deals from dozens of sites - with one search Try SideStep - The traveler's search engine www.sidestep.com ------------------------------------------------------- This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes! http://ads.osdn.com/?ad_ids93&alloc_id281&op=click _______________________________________________ Sisuite-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sisuite-users
