Andrea - here's the info:
>>OK, so kernel modules seem to be loaded correctly. Now maybe
/dev/sda2 is not present. Can you check?
/dev/sda2 is present
>>>Moreover could you post your autoinstallscript.conf, so we can
verify if your partitioning schema is correct (you can find it in
/etc/systemimager in your golden client).
<config>
<disk dev="/dev/sda" label_type="msdos" unit_of_measurement="MB">
<!--
This disk's output was brought to you by the partition tool "parted",
and by the numbers 4 and 5 and the letter Q.
-->
</disk>
<fsinfo line="10" real_dev="/dev/sda2" mount_dev="LABEL=/" mp="/"
fs="ext3" options="defaults" dump="1" pass="1" />
<fsinfo line="20" real_dev="/dev/sda1" mount_dev="LABEL=/boot"
mp="/boot" fs="ext3" options="defaults" dump="1" pass="2" />
<fsinfo line="30" real_dev="none" mp="/dev/pts" fs="devpts"
options="gid=5,mode=620" dump="0" pass="0" />
<fsinfo line="40" real_dev="none" mp="/proc" fs="proc"
options="defaults" dump="0" pass="0" />
<fsinfo line="50" real_dev="none" mp="/dev/shm" fs="tmpfs"
options="defaults" dump="0" pass="0" />
<fsinfo line="60" real_dev="/dev/sda3" mp="swap" fs="swap"
options="defaults" dump="0" pass="0" />
<fsinfo line="70" real_dev="/dev/cdrom" mp="/mnt/cdrom"
fs="udf,iso9660" options="noauto,owner,kudzu,ro" dump="0" pass="0"
format="no" />
<fsinfo line="80" real_dev="/dev/fd0" mp="/mnt/floppy" fs="auto"
options="noauto,owner,kudzu" dump="0" pass="0" format="no" />
<boel devstyle="static"/>
</config>
I have a couple of additional questions: The image server is
installed on a Fedora Core 6 i386, where as the golden client is
"RedHat EL (Linux RDEVSE07.immport.org 2.4.21-40.EL #1 SMP Thu Feb 2
22:14:00 EST 2006 x86_64 x86_64 " Does this make a differece?
Also, I'm booting the golden client using PXE. I can only see the
pretty much the last message on the console (Shit + Page up doesn't
work). Is there a way to log all previous messages?
Thanks for yuur help Andrea!
Regards,
-Andrea
On 1/8/07, Rene Pineda <[EMAIL PROTECTED]> wrote:
> Hi all -
> I created an Image of a PowerEdge 2850 using systemimager-server-3.7.5-1, but
> I can't reinstall it to the same hardware on another box. I browed the list
> and some ppl report similar or exact issues and workarounds, but I haven't
> had any success yet.
>
> The main issue seems to be the standard boot cd can't detect the scsi
> controller. A build your own kernel does not work either.
>
> Here's my configuration:
> Hardware: Dell PowerEdge 2850
> OS: RedHat EL (Linux RDEVSE07.immport.org 2.4.21-40.EL #1 SMP Thu Feb 2
> 22:14:00 EST 2006 x86_64 x86_64
>
> SystemImager Server:
> x86systemconfigurator-2.2.2-1.noarch.rpm
> systemimager-common-3.7.5-1.noarch.rpm
> systemimager-i386boot-standard-3.7.5-1.noarch.rpm
> systemimager-server-3.7.5-1.noarch.rpm
> systemimager-x86_64boot-standard-3.7.5-1.noarch.rpm
> _64 GNU/Linux)
> SysteImagerServer (compoenets I installled);
>
> SystemImager Client:
> systemimager-common-3.7.5-1
> systemimager-i386initrd_template-3.7.5-1
> systemimager-x86_64initrd_template-3.7.5-1
> systemimager-client-3.7.5-1
> systemconfigurator-2.2.2-1
>
> Any help please, including detail steps on how to fix this since I'm new to
> SystemImager. Thanks.
>
>
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Sisuite-users mailing list
Sisuite-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sisuite-users
