Rene Pineda wrote: > <disk dev="/dev/sda" label_type="msdos" unit_of_measurement="MB"> > <!-- > This disk's output was brought to you by the partition tool "parted", > and by the numbers 4 and 5 and the letter Q. > --> > </disk>
Here is the problem! The patitioning section is empty. Are you using 3.7.5 also at the client side? What's the output of the following commands (always in your golden client): uname -a parted --version parted -s -- /dev/sda print partes -s -- /dev/sda unit MB print > I have a couple of additional questions: The image server is > installed on a Fedora Core 6 i386, where as the golden client is > "RedHat EL (Linux RDEVSE07.immport.org 2.4.21-40.EL #1 SMP Thu Feb 2 > 22:14:00 EST 2006 x86_64 x86_64 " Does this make a differece? An image server can be used to install images of different architectures and kernel releases, so this is not a problem (remember to choose the correct kernel, initrd.img and boel_binaries for the opportune architectures). And surely this is not correlated with the problem above. > > Also, I'm booting the golden client using PXE. I can only see the > pretty much the last message on the console (Shit + Page up doesn't > work). Is there a way to log all previous messages? See: http://wiki.systemimager.org/index.php/Monitoring You can enable the virtual console adding the MONITOR_SERVER and MONITOR_CONSOLE options to the kernel boot parameters. Then launch si_monitortk and double-click on a client to open its remote console from your image server. Regards, -Andrea ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Sisuite-users mailing list Sisuite-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sisuite-users