Theoretically with UYOK you can install every server model, if the kernel of your distro supports the hardware. The point is how stable is UYOK (and all the components you need to use)... for this I strongly suggest to use the latest release: 3.7.6. It is the most stable release available at the moment (even if it's "tagged" as unstable) and it is the first release candidate for 3.8.0, available soon (we hope).
Moreover, every recent release preserves backward compatibility so in general you can run different versions of systemimager in your clients and image server. Regards, -Andrea [EMAIL PROTECTED] wrote: > > I currently use systemimager 3.4.1 extensively with HPDL380G3/4 servers > and am looking > at acquiring some DL380G5 systems with the P400 Smart Array controller. > I will be running > RH ES 4 U4 with LVM.The question is what is the minimum verion of > systemimager I need ? > Also related. Must I also update my current systemimager server to this > new verion(and all > the clients) or can I run two versions of systemimager on the same server ? > > Thanks > > The only reference I have found to the G5 is below - unfortunately there > does not appear > to be a response. > > > > David K Livingstone > CN Signals and Communications > 10229 127 Avenue floor 2 > Edmonton, AB, T5E 0B9 > Ph : 780 472-3959 Fax : 780 472-3050 > Email: [EMAIL PROTECTED] > ----- Forwarded by David Livingstone/LIVING03/CNR/CA on 2007/01/25 10:44 > ----- > *Andrea Righi <[EMAIL PROTECTED]>* > Sent by: [EMAIL PROTECTED] > > 2006/11/05 08:05 > Please respond to > [EMAIL PROTECTED]; Please respond to > sisuite-users@lists.sourceforge.net > > > > To > sisuite-users@lists.sourceforge.net > cc > > Subject > Re: [Sisuite-users] cciss: fifo full error > > > > > > > > > Are you using the default kernel+initrd? Have you tried with UYOK > (http://wiki.systemimager.org/index.php/UYOK)? > > Regards, > -Andrea > > Paul Newman wrote: >> Greetings. >> >> We are trying to use systemimager to image a couple of HP servers (model >> DL380 G5). The machine uses hardware raid (HP Smart Array P400 >> controller). I am able to configure one machine, install the 3.7.5-1 si >> rpms, make a golden image and upload it to the image server. >> >> After booting from an autoinstall CD the second host appears to connect >> to the server and begins running the master script. very soon, however >> it begins spewing out thousands of the error message in the subject >> line. Eventually it stops with the busybox prompt. >> >> Unfortunately I can't see the last good line as it has long ago scrolled >> off and out of the screen buffer. >> >> My tech assistant has confirmed that the hardware raid controller has >> been properly configured and the raid setup has been done with the same >> parameters/raid levels/drives as the golden image machine. >> >> Is this configuration supported? Are there special things to do with >> hardware raid? >> >> thanks for your assistance and for an awesome piece of work. >> >> p >> ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ sisuite-users mailing list sisuite-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sisuite-users
