The golden client system has 2 80GB hard drives in a hardware RAID 1 configuration. On the golden client, those systems are /dev/sda and /dev/sdb. Here is the /etc/fstab from that system:
# /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 # /dev/mapper/isw_ebcbaceghc_Volume01 UUID=31481579-4f75-4451-930e-f0da6a8e7cfb / ext3 defaults,errors=remount-ro 0 1 # /dev/mapper/isw_ebcbaceghc_Volume05 UUID=51e3e45e-13db-4102-a479-4abcf8ca2ee4 none swap sw 0 0 If I do a ls -la /dev/mapper/ on that system, I get: crw-rw---- 1 root root 10, 60 2009-04-05 13:55 control brw-rw---- 1 root disk 254, 0 2009-04-05 13:55 isw_ebcbaceghc_Volume0 brw-rw---- 1 root disk 254, 1 2009-04-05 13:55 isw_ebcbaceghc_Volume01 brw-rw---- 1 root disk 254, 2 2009-04-05 13:55 isw_ebcbaceghc_Volume05 However, when I do the same on the busybox prompt, I only get the record for "control". The isw_ block level devices are not being recreated by System Imager. Doing an fdisk -l on the desired clone does show /dev/sda and /dev/sdb, so the disks are there. Any ideas why System Imager isn't creating these devices? Is there something special I need to do in si_prepareclient to allow this? Best, Jeff From: Infos E-Blokos [mailto:in...@e-blokos.com] Sent: Monday, April 06, 2009 10:10 AM To: sisuite-users@lists.sourceforge.net Subject: Re: [sisuite-users] autoinstall from iso fails with disk error weird, if the script can mount other partition there is no reason that it can't mount this one. is it ext3 ? ----- Original Message ----- From: Jeffrey Strope <mailto:jstr...@intrahealth.org> To: sisuite-users@lists.sourceforge.net Sent: Monday, April 06, 2009 10:05 AM Subject: Re: [sisuite-users] autoinstall from iso fails with disk error Doing that gives me: "mount: mount point /dev/mapper/isw_ebcbaceghc_Volume05 does not exist" Best, Jeff From: Infos E-Blokos [mailto:in...@e-blokos.com] Sent: Sunday, April 05, 2009 7:54 PM To: sisuite-users@lists.sourceforge.net Subject: Re: [sisuite-users] autoinstall from iso fails with disk error before the command line mkswap -v1 /dev/mapper/isw_ebcbaceghc_Volume05 put "mount /dev/sdX /dev/mapper/isw_ebcbaceghc_Volume05" Franck ----- Original Message ----- From: Jeffrey Strope <mailto:jstr...@intrahealth.org> To: sisuite-users@lists.sourceforge.net Sent: Sunday, April 05, 2009 4:30 PM Subject: Re: [sisuite-users] autoinstall from iso fails with disk error I've tried that, but might be missing something. Here's the portion of my image.master script that fails: logmsg "mkswap -v1 /dev/mapper/isw_ebcbaceghc_Volume05 || shellout" mkswap -v1 /dev/mapper/isw_ebcbaceghc_Volume05 || shellout logmsg "swapon /dev/mapper/isw_ebcbaceghc_Volume05 || shellout" swapon /dev/mapper/isw_ebcbaceghc_Volume05 || shellout When I'm at the busybox prompt, and do an "ls -la /dev/mapper/" all I see is a file named "control". What should I mount before this executes? Best, Jeff
------------------------------------------------------------------------------
_______________________________________________ sisuite-users mailing list sisuite-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sisuite-users
