I had also troubles but after 2 weeks it's ok... good luck ----- Original Message ----- From: Jeffrey Strope To: sisuite-users@lists.sourceforge.net Sent: Monday, April 06, 2009 11:08 AM Subject: Re: [sisuite-users] FW: autoinstall from iso fails with disk error
Binary. Thanks for your help on this. Guess I'll have to look at another package for this. Best, Jeff Strope Open Source Systems Administrator IntraHealth International, Inc. jstr...@intrahealth.org 919.313.6203 From: Infos E-Blokos [mailto:in...@e-blokos.com] Sent: Monday, April 06, 2009 11:05 AM To: sisuite-users@lists.sourceforge.net Subject: Re: [sisuite-users] FW: autoinstall from iso fails with disk error can't help you anymore :(. is this control file binary or something inside ? ----- Original Message ----- From: Jeffrey Strope To: sisuite-users@lists.sourceforge.net Sent: Monday, April 06, 2009 10:57 AM Subject: Re: [sisuite-users] FW: autoinstall from iso fails with disk error No luck there either. Using either the BOEL kernel or my own fails with the same error. Best, Jeff From: Infos E-Blokos [mailto:in...@e-blokos.com] Sent: Monday, April 06, 2009 10:37 AM To: sisuite-users@lists.sourceforge.net Subject: Re: [sisuite-users] FW: autoinstall from iso fails with disk error --autodetect-disks maybe ? it couls be also UUID problem, maybe BOEL kernel is not configured for that so you need your UYOK kernel with --my-modules option Franck Chionna ----- Original Message ----- From: Jeffrey Strope To: sisuite-users@lists.sourceforge.net Sent: Monday, April 06, 2009 10:31 AM Subject: [sisuite-users] FW: autoinstall from iso fails with disk error The golden client system has 2 80GB hard drives in a hardware RAID 1 configuration. On the golden client, those systems are /dev/sda and /dev/sdb. Here is the /etc/fstab from that system: # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 # /dev/mapper/isw_ebcbaceghc_Volume01 UUID=31481579-4f75-4451-930e-f0da6a8e7cfb / ext3 defaults,errors=remount-ro 0 1 # /dev/mapper/isw_ebcbaceghc_Volume05 UUID=51e3e45e-13db-4102-a479-4abcf8ca2ee4 none swap sw 0 0 If I do a ls -la /dev/mapper/ on that system, I get: crw-rw---- 1 root root 10, 60 2009-04-05 13:55 control brw-rw---- 1 root disk 254, 0 2009-04-05 13:55 isw_ebcbaceghc_Volume0 brw-rw---- 1 root disk 254, 1 2009-04-05 13:55 isw_ebcbaceghc_Volume01 brw-rw---- 1 root disk 254, 2 2009-04-05 13:55 isw_ebcbaceghc_Volume05 However, when I do the same on the busybox prompt, I only get the record for "control". The isw_ block level devices are not being recreated by System Imager. Doing an fdisk -l on the desired clone does show /dev/sda and /dev/sdb, so the disks are there. Any ideas why System Imager isn't creating these devices? Is there something special I need to do in si_prepareclient to allow this? Best, Jeff From: Infos E-Blokos [mailto:in...@e-blokos.com] Sent: Monday, April 06, 2009 10:10 AM To: sisuite-users@lists.sourceforge.net Subject: Re: [sisuite-users] autoinstall from iso fails with disk error weird, if the script can mount other partition there is no reason that it can't mount this one. is it ext3 ? ----- Original Message ----- From: Jeffrey Strope To: sisuite-users@lists.sourceforge.net Sent: Monday, April 06, 2009 10:05 AM Subject: Re: [sisuite-users] autoinstall from iso fails with disk error Doing that gives me: "mount: mount point /dev/mapper/isw_ebcbaceghc_Volume05 does not exist" Best, Jeff From: Infos E-Blokos [mailto:in...@e-blokos.com] Sent: Sunday, April 05, 2009 7:54 PM To: sisuite-users@lists.sourceforge.net Subject: Re: [sisuite-users] autoinstall from iso fails with disk error before the command line mkswap -v1 /dev/mapper/isw_ebcbaceghc_Volume05 put "mount /dev/sdX /dev/mapper/isw_ebcbaceghc_Volume05" Franck ----- Original Message ----- From: Jeffrey Strope To: sisuite-users@lists.sourceforge.net Sent: Sunday, April 05, 2009 4:30 PM Subject: Re: [sisuite-users] autoinstall from iso fails with disk error I've tried that, but might be missing something. Here's the portion of my image.master script that fails: logmsg "mkswap -v1 /dev/mapper/isw_ebcbaceghc_Volume05 || shellout" mkswap -v1 /dev/mapper/isw_ebcbaceghc_Volume05 || shellout logmsg "swapon /dev/mapper/isw_ebcbaceghc_Volume05 || shellout" swapon /dev/mapper/isw_ebcbaceghc_Volume05 || shellout When I'm at the busybox prompt, and do an "ls -la /dev/mapper/" all I see is a file named "control". What should I mount before this executes? Best, Jeff -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------------- ------------------------------------------------------------------------------ -------------------------------------------------------------------------- _______________________________________________ sisuite-users mailing list sisuite-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sisuite-users -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ---------------------------------------------------------------------------- ------------------------------------------------------------------------------ ---------------------------------------------------------------------------- _______________________________________________ sisuite-users mailing list sisuite-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sisuite-users -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ------------------------------------------------------------------------------ ------------------------------------------------------------------------------ ------------------------------------------------------------------------------ _______________________________________________ sisuite-users mailing list sisuite-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sisuite-users -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.
------------------------------------------------------------------------------
_______________________________________________ sisuite-users mailing list sisuite-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sisuite-users
