if you do si_prepareclient it does boel_binaries.tar.gz
----- Original Message -----
From: Gorka Barracuda
To: sisuite-users@lists.sourceforge.net
Sent: Thursday, April 09, 2009 7:59 AM
Subject: Re: [sisuite-users] problems with lvm2
Thanks for your fast response dalamar.
You solved this problem.
It seems that's working fine for this part but Now I have got some
problems with boel_binaries.tar.gz package for 64 bits that doesn't exist. I
will re-read again all documentation for looking for any information.
thanks for all
gorkab
--- El mié, 8/4/09, Dalamar <d4la...@gmail.com> escribió:
De: Dalamar <d4la...@gmail.com>
Asunto: Re: [sisuite-users] problems with lvm2
Para: sisuite-users@lists.sourceforge.net
Fecha: miércoles, 8 abril, 2009 4:00
Hi,
Which bootloader are you trying to use ?
I experienced same problems trying to boot with "root" kernel
parameter in "/dev/$VolumeGroup/$LogicalVolume" format.
It's better to use "/dev/mapper/$VolumeGroup-$LogicalVolume" as kernel
parameter and as /etc/fstab entry.
With these changes I solved a similar problem.
Hi,
d4lamar
2009/4/8 Gorka Barracuda <gorka_barrac...@yahoo.es>:
> Dear All,
> I'm trying to restore an image with pxe server and systemimager
(4.0.2 in
> both sites -golden and server-) and I'm obtaining this error:
> Unable to find volume group "vgsys"
> Waitinf for device /dev/vgsys/root to appear: not found -- extiing
to
> /bin/sh:
> This is my autoinstallscript.conf where you can see the lvm
configuration
> (it seems correct according to my golden client's partitions):
> <!--
>
> autoinstallscript.conf
> vi:set filetype=xml:
>
> This file contains partition information about the disks on your
golden
> client. It is stored here in a generic format that is used by
your
> SystemImager server to create an autoinstall script for cloning
this
> system.
>
> You can change the information in this file to affect how your
target
> machines are installed. See "man autoinstallscript.conf" for
details.
>
> -->
> <config>
> <disk dev="/dev/sda" label_type="msdos" unit_of_measurement="MB">
> <!--
> This disk's output was brought to you by the partition tool
"parted",
> and by the numbers 4 and 5 and the letter Q.
> -->
> <part num="1" size="271" p_type="primary" p_name="-"
flags="boot"
> />
> <part num="2" size="2155" p_type="primary" p_name="-"
flags="-" />
> <part num="3" size="*" p_type="extended" p_name="-"
flags="lba" />
> <part num="5" size="*" p_type="logical" p_name="-"
flags="lvm"
> lvm_group="vgsys" />
> </disk>
> <disk dev="/dev/sdb" label_type="msdos" unit_of_measurement="MB">
> <!--
> This disk's output was brought to you by the partition tool
"parted",
> and by the numbers 4 and 5 and the letter Q.
> -->
> <part num="1" size="2155" p_type="primary" p_name="-"
flags="-" />
> <part num="2" size="*" p_type="extended" p_name="-"
flags="lba" />
> <part num="5" size="*" p_type="logical" p_name="-"
flags="lvm"
> lvm_group="vgsys" />
> </disk>
>
> <lvm version="2">
> <lvm_group name="vgsys" max_log_vols="0" max_phys_vols="0"
> phys_extent_size="4096K">
> <lv name="root" size="10485760K" />
> <lv name="scratch" size="209715200K" />
> <lv name="var" size="5242880K" />
> </lvm_group>
> </lvm>
> <fsinfo line="10" real_dev="/dev/vgsys/root" mp="/" fs="ext3"
> options="acl,user_xattr" dump="1" pass="1" />
> <fsinfo line="20" real_dev="/dev/sda1" mp="/boot" fs="ext3"
> options="acl,user_xattr" dump="1" pass="2" />
> <fsinfo line="30" real_dev="/dev/vgsys/scratch" mp="/scratch"
fs="xfs"
> options="defaults" dump="1" pass="2"
> />
> <fsinfo line="40" real_dev="/dev/vgsys/var" mp="/var" fs="xfs"
> options="defaults" dump="1" pass="2" />
> <fsinfo line="50" real_dev="/scratch/SuSE" mp="/SuSE" fs="none"
> options="rw,bind" dump="0" pass="0" />
> <fsinfo line="60" real_dev="iqtc1.qt.ub.es:/sgeinst"
mp="/sgeinst"
> fs="nfs" options="bg,hard,intr" dump="0"
> pass="0" />
> <fsinfo line="70" real_dev="/dev/sda2" mp="swap" fs="swap"
> options="defaults" dump="0" pass="0" />
> <fsinfo line="80" real_dev="/dev/sdb1" mp="swap" fs="swap"
> options="defaults" dump="0" pass="0" />
> <fsinfo line="90" real_dev="proc" mp="/proc" fs="proc"
> options="defaults" dump="0" pass="0" />
> <fsinfo line="100" real_dev="sysfs" mp="/sys" fs="sysfs"
> options="noauto" dump="0" pass="0" />
> <fsinfo line="110" real_dev="debugfs" mp="/sys/kernel/debug"
> fs="debugfs" options="noauto" dump="0" pass="0
> " />
> <fsinfo line="120" real_dev="usbfs" mp="/proc/bus/usb"
fs="usbfs"
> options="noauto" dump="0" pass="0" forma
> t="no" />
> <fsinfo line="130" real_dev="devpts" mp="/dev/pts" fs="devpts"
> options="mode=0620,gid=5" dump="0" pass="0"
> />
> <boel devstyle="udev"/>
> </config>
> The commands used for creating the images:
>
> si_prepareclient --server 192.168.10.250
>
>
> si_getimage --golden-client 192.168.10.1 --image hp_proilant_dl160
> --ip-assignment dhcp -exclude /scratch -exclude /opt -exclude /home
-exclude
> /sge
>
>
> and the pxe default config file :
>
> DISPLAY /X86PC/UNDI/linux-install/message.txt
> PROMPT 1
> DEFAULT proilantdl160
> LABEL proilantdl160
> kernel vmlinuz_hp_dl160
> append vga=normal IMAGENAME=hp_proilant_dl160
initrd=initrd_hp_dl160
> roo
> t=/dev/vgsys/root
>
> Could anybody help me?
> Thanks in advance,
> best regards
> gorkab
>
>
>
>
------------------------------------------------------------------------------
> This SF.net email is sponsored by:
> High Quality Requirements in a Collaborative Environment.
> Download a free trial of Rational Requirements Composer Now!
> http://p.sf.net/sfu/www-ibm-com
> _______________________________________________
> sisuite-users mailing list
> sisuite-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/sisuite-users
>
>
------------------------------------------------------------------------------
This SF.net email is sponsored by:
High Quality Requirements in a Collaborative Environment.
Download a free trial of Rational Requirements Composer Now!
http://p.sf.net/sfu/www-ibm-com
_______________________________________________
sisuite-users mailing list
sisuite-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sisuite-users
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
This SF.net email is sponsored by:
High Quality Requirements in a Collaborative Environment.
Download a free trial of Rational Requirements Composer Now!
http://p.sf.net/sfu/www-ibm-com
------------------------------------------------------------------------------
_______________________________________________
sisuite-users mailing list
sisuite-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sisuite-users
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
------------------------------------------------------------------------------
This SF.net email is sponsored by:
High Quality Requirements in a Collaborative Environment.
Download a free trial of Rational Requirements Composer Now!
http://p.sf.net/sfu/www-ibm-com
_______________________________________________
sisuite-users mailing list
sisuite-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sisuite-users
