I have a couple of questions that the group could possibly help me
with these involve the Eyepiece menu and adding your own
I have the following eyepiece selection :-
Focal Length
Field of View
Vixen
13mm
65�
Vixen
40mm
42�
Vixen
4mm
45�
TAL
40mm
45�
TAL
25mm
52�
TAL
7.5mm
52�
I have a 1200mm focal length tube and I have put into the field of
vision colum the following values:-
13mm = 42
40mm = 84
4mm =9
40mm =90
25mm = 65
7.5mm=19
Are these the right figures to go into the Field of Vision box for
these eyepieces, Also I am confused on the CCD Field of what to put
in there I have a Philips TouCam and the specification of the CCD is
as follows:-
� Image size: Diagonal 4.5mm (Type 1/4)
� Number of effective pixels: 659 (H) � 494 (V) approx. 330K pixels
� Total number of pixels: 692 (H) � 504 (V) approx. 350K pixels
� Chip size: 4.60mm (H) � 3.97mm (V)
� Unit cell size: 5.6�m (H) � 5.6�m (V)
What do I put from this information into the CCD options please.
Thank you for any assistance in this matter
Kindest Regards, Martin Farmer
------------------------ Yahoo! Groups Sponsor --------------------~-->
$9.95 domain names from Yahoo!. Register anything.
http://us.click.yahoo.com/J8kdrA/y20IAA/yQLSAA/1.XolB/TM
--------------------------------------------------------------------~->
To Post a message, send it to: [email protected]
To Unsubscribe, send a blank message to:
[EMAIL PROTECTED]
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/skychart-discussion/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
