Dan,

Can you confirm that you pressed "connect" and the dialog properly connected
to the scope? (You might need to adjust the setup parameters.)

The other telescope options are all greyed (except for picking the interface
and telescope) until you are connected.

Joe Shuster
Lake County Astronomical Society -- www.lcas-astronomy.org

  -----Original Message-----
  From: [email protected]
[mailto:[EMAIL PROTECTED] Behalf Of fishyfish101
  Sent: Thursday, June 23, 2005 3:55 PM
  To: [email protected]
  Subject: [skychart-discussion] Intelliscope connection


  Ok, I must be doing something wrong in my set up with Cartes du Ciel.
  I installed the current version of it and also installed the encoder
  driver with it. I configured it for the Intelliscope, as directed.
  I go through the alignment procedure and sync it after each
  selection. The problem is that I do not get an interface between the
  scope and PC. I'm assuming that when done correctly, the cursor will
  move with the scope?

  When I go to the main menu to select telescope, the only item I can
  select is the scope option. The "show scope position" option, which
  I believe is what I need, is grayed out like it hasn't been
  installed. I thought that the encoder driver would install it. Is
  there an additional driver I need to install?

  I believe everything else is ok with it. Thanks for the help and in
  relieving my frustration!

  Thanks,


  Dan James
  Greenville, Pa
  XT8i








----------------------------------------------------------------------------
--
  Yahoo! Groups Links

    a.. To visit your group on the web, go to:
    http://groups.yahoo.com/group/skychart-discussion/

    b.. To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

    c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/skychart-discussion/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Reply via email to