Meu micro que está corrompendo minha partição de sistema quase todo dia...
*-core
description: Motherboard
product: 'K8N'
vendor: ASUSTeK Computer INC.
physical id: 0
version: Rev 1.xx
serial: MB-1234567890
*-firmware
description: BIOS
vendor: American Megatrends Inc.
physical id: 0
version: 1011.005 (02/16/2006)
size: 64KB
-cpu
description: CPU
product: AMD Sempron(tm) Processor 3000+
vendor: Advanced Micro Devices [AMD]
physical id: 4
bus info: [EMAIL PROTECTED]
version: 15.12.2
serial: To Be Filled By O.E.M.
slot: Socket 754
size: 1800MHz
capacity: 1800MHz
width: 64 bits
clock: 200MHz
Estou usando nele o kernel 2.4 com um gravador de cd um gravador de dvd
(ambos lg)
com o parametro hdc=ide-scsi hdd=ide-scsi no boot e nao tenho problema
com eles.
mas o hard disk que não é sata, eh um ide comum fica inconsistente quase
todo dia...
Testei outro hd nele e deu o mesmo problema...
Extrato do dmesg :
ACPI: System [ACPI] (supports S0 S1 S3 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: Power Resource [ISAV] (on)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUS0] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUS1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUS2] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LKLN] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LAUI] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LKMO] (IRQs 3 4 5 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LTIE] (IRQs 10) *0, disabled.
ACPI-0201: *** Error: Return object type is incorrect
[\_SB_.LATA._CRS] (Nod
e c1c38bc0), AE_TYPE
ACPI: PCI Interrupt Link [LATA] (IRQs 3 4 6 7 10 11 12 14 15) *0
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE3-250: IDE controller at PCI slot 00:08.0
NFORCE3-250: chipset revision 162
NFORCE3-250: not 100% native mode: will probe irqs later
NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE3-250: 00:08.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 6E030L0, ATA DISK drive
hdc: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
hdd: HL-DT-ST CD-RW GCE-8240B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 60058656 sectors (30750 MB) w/2048KiB Cache, CHS=3738/255/63, UDMA(133)
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 >
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
PCI: Setting latency timer of device 00:06.0 to 64
PCI: cache line size of 64 is not supported by device 00:02.2
ehci_hcd 00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
AGP: Found AGPv3 capable device at 0:0:0
AGP: Found AGPv3 capable device at 1:0:0
AGP: Enough AGPv3 devices found, setting up...
AGP: Setting up AGPv3 capable device at 0:0:0
AGP: Putting device into 4x mode
AGP: Setting up AGPv3 capable device at 1:0:0
AGP: Putting device into 4x mode
spurious 8259A interrupt: IRQ7.
E esta a saida do lspci :
00:00.0 Host bridge: nVidia Corporation nForce3 250Gb Host Bridge (rev a1)
00:01.0 ISA bridge: nVidia Corporation nForce3 250Gb LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System Management
(rev a1)
00:02.0 USB Controller: nVidia Corporation CK8S USB Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation CK8S USB Controller (rev a1)
00:02.2 USB Controller: nVidia Corporation nForce3 EHCI USB 2.0
Controller (rev a2)
00:05.0 Bridge: nVidia Corporation CK8S Ethernet Controller (rev a2)
00:06.0 Multimedia audio controller: nVidia Corporation nForce3 250Gb
AC'97 Audio Controller (rev a1)
00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA Controller
(v2.5) (rev a2)
00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to PCI
Bridge (rev a2)
00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge
(rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX
4000 AGP 8x] (rev c1)
Estou usando o kernel 2.4 do cd do slackware 11 e reiserfs como sistema
de arquivos .
Se alguem tem uma pista sobre o que pode estar havendo agradeço o feedback.
--~--~---------~--~----~------------~-------~--~----~
--
GUS-BR - Grupo de Usuários de Slackware - BR
http://www.slackwarebrasil.org/
http://groups-beta.google.com/group/slack-users-br
-~----------~----~----~----~------~----~------~--~---
