no windows 98 isso ja aconteceu porque o micro desligava antes que os dados que estavam em memoria fossem gravados no disco, não seria um caso semelhante ?
----- Original Message ----- From: Lucas Vargas To: [email protected] Sent: Wednesday, January 24, 2007 9:25 AM Subject: [slack-users] Re: Asus K8N + HD IDE corrompendo arquivos eu tb tenho esse problema, meu micro eh um athlon 64 3000+, a8n-e, hd ide, ele corrompe o sistema de arquivos da partição do sistema, to usando reiserfs tb. . . se alguem souber de algo ; ] On 1/23/07, Gmail <[EMAIL PROTECTED]> wrote: Meu micro que está corrompendo minha partição de sistema quase todo dia... *-core description: Motherboard product: 'K8N' vendor: ASUSTeK Computer INC. physical id: 0 version: Rev 1.xx serial: MB-1234567890 *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 1011.005 (02/16/2006) size: 64KB -cpu description: CPU product: AMD Sempron(tm) Processor 3000+ vendor: Advanced Micro Devices [AMD] physical id: 4 bus info: [EMAIL PROTECTED] version: 15.12.2 serial: To Be Filled By O.E.M. slot: Socket 754 size: 1800MHz capacity: 1800MHz width: 64 bits clock: 200MHz Estou usando nele o kernel 2.4 com um gravador de cd um gravador de dvd (ambos lg) com o parametro hdc=ide-scsi hdd=ide-scsi no boot e nao tenho problema com eles. mas o hard disk que não é sata, eh um ide comum fica inconsistente quase todo dia... Testei outro hd nele e deu o mesmo problema... Extrato do dmesg : ACPI: System [ACPI] (supports S0 S1 S3 S4 S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: Power Resource [ISAV] (on) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LUS0] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUS1] (IRQs 3 4 5 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUS2] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LKLN] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LAUI] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LKMO] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 10) *0, disabled. ACPI: PCI Interrupt Link [LTIE] (IRQs 10) *0, disabled. ACPI-0201: *** Error: Return object type is incorrect [\_SB_.LATA._CRS] (Nod e c1c38bc0), AE_TYPE ACPI: PCI Interrupt Link [LATA] (IRQs 3 4 6 7 10 11 12 14 15) *0 Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE3-250: IDE controller at PCI slot 00:08.0 NFORCE3-250: chipset revision 162 NFORCE3-250: not 100% native mode: will probe irqs later NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE3-250: 00:08.0 (rev a2) UDMA133 controller ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA hda: Maxtor 6E030L0, ATA DISK drive hdc: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive hdd: HL-DT-ST CD-RW GCE-8240B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 60058656 sectors (30750 MB) w/2048KiB Cache, CHS=3738/255/63, UDMA(133) Partition check: hda: hda1 hda2 hda3 hda4 < hda5 > SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 PCI: Setting latency timer of device 00:06.0 to 64 PCI: cache line size of 64 is not supported by device 00:02.2 ehci_hcd 00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 AGP: Found AGPv3 capable device at 0:0:0 AGP: Found AGPv3 capable device at 1:0:0 AGP: Enough AGPv3 devices found, setting up... AGP: Setting up AGPv3 capable device at 0:0:0 AGP: Putting device into 4x mode AGP: Setting up AGPv3 capable device at 1:0:0 AGP: Putting device into 4x mode spurious 8259A interrupt: IRQ7. E esta a saida do lspci : 00:00.0 Host bridge: nVidia Corporation nForce3 250Gb Host Bridge (rev a1) 00:01.0 ISA bridge: nVidia Corporation nForce3 250Gb LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System Management (rev a1) 00:02.0 USB Controller: nVidia Corporation CK8S USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation CK8S USB Controller (rev a1) 00:02.2 USB Controller: nVidia Corporation nForce3 EHCI USB 2.0 Controller (rev a2) 00:05.0 Bridge: nVidia Corporation CK8S Ethernet Controller (rev a2) 00:06.0 Multimedia audio controller: nVidia Corporation nForce3 250Gb AC'97 Audio Controller (rev a1) 00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA Controller (v2.5) (rev a2) 00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to PCI Bridge (rev a2) 00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 4000 AGP 8x] (rev c1) Estou usando o kernel 2.4 do cd do slackware 11 e reiserfs como sistema de arquivos . Se alguem tem uma pista sobre o que pode estar havendo agradeço o feedback. -- "everything that has a begining, has an end" --~--~---------~--~----~------------~-------~--~----~ -- GUS-BR - Grupo de Usuários de Slackware - BR http://www.slackwarebrasil.org/ http://groups.google.com/group/slack-users-br -~----------~----~----~----~------~----~------~--~---
