Have you tried to telnet to the unit and see if you can configure it OK or
not. Usually it's a good start to see if the thing actually works.
thanks,
George Vieira
Network Administrator
Citadel Computer Systems P/L
http://www.citadelcomputer.com.au
-----Original Message-----
From: Howard Lowndes [mailto:[EMAIL PROTECTED]]
Sent: Monday, 7 August 2000 2:17 PM
To: Mail List - SLUG; Mail List - CLUG
Subject: [SLUG] HP JetDirect problem [maybe OT]
I'm trying to get an HP JetDirect to work. I can ping the mother OK, but
as soon as I either send something to it with TCP lpr or try to telnet it
I see the TCP SYN packet go out and I immediately get back a TCP RST ACK
packet instead of the TCP SYN ACK I would expect.
When I run the HP Web JetAdmin software the card is discovered fine with
the SNMP protocol.
Any ideas?
--
Howard.
______________________________________________________
LANNet Computing Associates <http://www.lannet.com.au>
--
SLUG - Sydney Linux User Group Mailing List - http://slug.org.au/
More Info: http://slug.org.au/lists/listinfo/slug
--
SLUG - Sydney Linux User Group Mailing List - http://slug.org.au/
More Info: http://slug.org.au/lists/listinfo/slug
