Been there, tried that with port 25 and 515. Some one did suggest port
9100 and that worked.
--
Howard.
______________________________________________________
LANNet Computing Associates <http://www.lannet.com.au>
On Mon, 7 Aug 2000, George Vieira wrote:
> Have you tried to telnet to the unit and see if you can configure it OK or
> not. Usually it's a good start to see if the thing actually works.
>
> thanks,
> George Vieira
> Network Administrator
> Citadel Computer Systems P/L
> http://www.citadelcomputer.com.au
>
>
>
> -----Original Message-----
> From: Howard Lowndes [mailto:[EMAIL PROTECTED]]
> Sent: Monday, 7 August 2000 2:17 PM
> To: Mail List - SLUG; Mail List - CLUG
> Subject: [SLUG] HP JetDirect problem [maybe OT]
>
>
> I'm trying to get an HP JetDirect to work. I can ping the mother OK, but
> as soon as I either send something to it with TCP lpr or try to telnet it
> I see the TCP SYN packet go out and I immediately get back a TCP RST ACK
> packet instead of the TCP SYN ACK I would expect.
>
> When I run the HP Web JetAdmin software the card is discovered fine with
> the SNMP protocol.
>
> Any ideas?
>
>
--
SLUG - Sydney Linux User Group Mailing List - http://slug.org.au/
More Info: http://slug.org.au/lists/listinfo/slug
