Hi guys,
On one of the boxes I maintain, is having problems with the box. It
mysteriously reboots and freezes (including the network).
The errors I get in the logs are:
Apr 10 19:10:44 fsbris kernel: hda: lost interrupt
Apr 10 19:10:44 fsbris kernel: hda: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Apr 10 19:10:44 fsbris kernel: hda: drive not ready for command
This happened every now and then, its not constant.
I also checked google, and it mentioned making sure the APM settings are
correct, and perhaps turning DMA off/on, and see if it helps. APM is not
enabled in the bios, or kernel (/proc/apm is not present), and I booted up
with lilo command ide=nodma The lilo command made it worse as when there is
a heavy IDE load the error message is constant, but it doesn't freeze or
reboot!
Could this be a hardware problem, or is there somewhere else I need to look?
Thanks,
Scott
--
Scott Ragen
Roadtech Systems Ltd.
Technical Support
Ph: +61 2 9807 3516 Fax: +61 2 9008 5294
www.roadtechsystems.com.au
--
SLUG - Sydney Linux User Group Mailing List - http://slug.org.au/
More Info: http://lists.slug.org.au/listinfo/slug
