Hi All, I have two ISA network cards that I am trying to get working on an old 486 for a friend as his cable gateway/router, and I can't for the life of me work out how to get them both working. Here are the details
* Both cards are identical ne2000 compatible cards * I am running woody with kernel 2.2.20 (I have tried 2.4.18) * I can get both of the cards working seperately * One card is io=0x220 and irq=5, the other is io=0x240 and irq=10 * I have been advised to try adding an appaend statement in lilo which will represent each card. To which I have added "ether=5,io=0x220 eth0 ether=10,io=0x240 eth1"...This didn't seem to help at all. * I can only get each isa card to work if I run 'modprobe ne io=0x220' (or io=0x240)...but for obvious reasons this will only load one card. If you have any thoughts please let me know. And please cc: [EMAIL PROTECTED] in on any correspondence because I don't check this address from home and I would like to get this working over the weekend. Cheers, Adam. -- SLUG - Sydney Linux User's Group - http://slug.org.au/ More Info: http://lists.slug.org.au/listinfo/slug
