Hi, I have used these cards. They should be detected as normal serial ports by a 2.4 kernel. Check dmesg for any serial detection lines. other than that you may need to use setserial to set them up. the banksia site does have linux info IIRC
dave > > > Sluggers, > > Does anyone have any experience with Banksia Intra4 Pci modem cards? > > I have put one into a Dell Optiplex GX1 with Redhat 7.2. The card is > not detected by Kudzu, nor does it list in /proc/pci. However a > borrowed PCI ether card is detected so I assume that the PCI bus is all > ok. > > There are no options in the BIOS of the Dell that have anything to do > with the PCI bus. > > Possible that the card is dead, but it was working when it was removed > from a WNT4.0 box. > > Please reply direct as I'm out on site posting from clients e-mail > address (I.E not subscribed) > > Many TIA's > > > Pete > > > -- > SLUG - Sydney Linux User's Group - http://slug.org.au/ > More Info: http://lists.slug.org.au/listinfo/slug -- Solutions First http://www.solutionsfirst.com.au Ph: 9484 9433 Fax: 9484 0961 Mob: 0413 022 143 -- SLUG - Sydney Linux User's Group - http://slug.org.au/ More Info: http://lists.slug.org.au/listinfo/slug
