After fixing my earlier problems of not being able to get X to start, I now am faced with another problem. When I 'startx' I get a grey screen, followed by the KDE3 splash screen where it appears to be loading the various components, and then the screen goes grey again and it just sits there...
I have attached the output.
The machine is a:
Celeron 566Mhz
320 Mb RAM
TNT2
Viewsonic e653 monitor
Intel 820 motherboard (all-in-wonder)
Cheers,
Adam.
rogue:/var/run# cat /home/ahewitt/kde.txt warning: process set to nice value 0 instead of -10 as requested
This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.1.0.1 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 21 December 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.4.17 i686 [ELF] Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Sat Oct 26 01:42:04 2002 (==) Using config file: "/etc/X11/XF86Config-4" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Generic Monitor" (**) | |-->Device "Generic Video Card" (**) |-->Input Device "Generic Keyboard" (**) XKB: rules: "xfree86" (**) XKB: model: "pc104" (**) XKB: layout: "us" (**) |-->Input Device "Configured Mouse" (WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist. Entry deleted from font path. (WW) The directory "/usr/lib/X11/fonts/Type1" does not exist. Entry deleted from font path. (WW) The directory "/usr/lib/X11/fonts/Speedo" does not exist. Entry deleted from font path. (**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/l ib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 0.1.0 (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 0.1.0 (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (--) PCI:*(2:0:0) NVidia Riva Ultra 64 rev 21, Mem @ 0xfd000000/24, 0xf2000000/25, BIOS @ 0xfeaf0000/16 (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a (II) Module freetype: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.1.9 (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a (II) Module pex5: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a (II) Module record: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.13.0 (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a (II) Module speedo: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libxie.a (II) Module xie: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o (II) Module nv: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.1 (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) NV: driver for NVIDIA chipsets: RIVA128, RIVATNT, RIVATNT2, RIVATNT2 (A), RIVATNT2 (B), RIVATNT2 (Ultra), RIVATNT2 (Vanta), RIVATNT2 M64, RIVATNT2 (Integrated), GeForce 256, GeForce DDR, Quadro, GeForce2 GTS, GeForce2 GTS (rev 1), GeForce2 ultra, Quadro 2 Pro, GeForce2 MX, GeForce2 MX DDR, Quadro 2 MXR, GeForce 2 Go, GeForce3, GeForce3 (rev 1), GeForce3 (rev 2), GeForce3 (rev 3) (--) Assigning device section with no busID to primary device (--) Chipset RIVATNT2 M64 found (II) NV(0): Initializing int10 (II) NV(0): Primary V_BIOS segment is: 0xc000 (--) NV(0): Chipset: "RIVATNT2 M64" (**) NV(0): Depth 24, (--) framebuffer bpp 32 (==) NV(0): RGB weight 888 (==) NV(0): Default visual is TrueColor (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 0.1.0 (==) NV(0): Using HW cursor (--) NV(0): Linear framebuffer at 0xF2000000 (--) NV(0): MMIO registers at 0xFD000000 (--) NV(0): VideoRAM: 32768 kBytes (II) Loading /usr/X11R6/lib/modules/libi2c.a (II) Module i2c: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.2.0 (II) NV(0): I2C bus "DDC" initialized. (II) NV(0): I2C device "DDC:ddc2" registered. (II) NV(0): I2C device "DDC:ddc2" removed. (II) NV(0): I2C device "DDC:ddc2" registered. (II) NV(0): I2C device "DDC:ddc2" removed. (II) NV(0): DDC Monitor info: 0x8667098 (II) NV(0): Manufacturer: VSC Model: 5249 Serial#: 1973 (II) NV(0): Year: 1999 Week: 19 (II) NV(0): EDID Version: 1.2 (II) NV(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) NV(0): Signal levels configurable (II) NV(0): Sync: Separate (II) NV(0): Max H-Image Size [cm]: horiz.: 28 vert.: 21 (II) NV(0): Gamma: 2.90 (II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) NV(0): First detailed timing is preferred mode (II) NV(0): GTF timings supported (II) NV(0): redX: 0.620 redY: 0.350 greenX: 0.305 greenY: 0.600 (II) NV(0): blueX: 0.155 blueY: 0.065 whiteX: 0.283 whiteY: 0.298 (II) NV(0): Supported VESA Video Modes: (II) NV(0): 720x400@70Hz (II) NV(0): 720x400@88Hz (II) NV(0): 640x480@60Hz (II) NV(0): 640x480@67Hz (II) NV(0): 640x480@72Hz (II) NV(0): 640x480@75Hz (II) NV(0): 800x600@56Hz (II) NV(0): 800x600@60Hz (II) NV(0): 800x600@72Hz (II) NV(0): 800x600@75Hz (II) NV(0): 832x624@75Hz (II) NV(0): 1024x768@87Hz (interlaced) (II) NV(0): 1024x768@60Hz (II) NV(0): 1024x768@70Hz (II) NV(0): 1024x768@75Hz (II) NV(0): Manufacturer's mask: 0 (II) NV(0): Supported Future Video Modes: (II) NV(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833 (II) NV(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853 (II) NV(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) NV(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) NV(0): #4: hsize: 1280 vsize 960 refresh: 60 vid: 16513 (II) NV(0): #5: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) NV(0): Supported additional Video Mode: (II) NV(0): clock: 94.5 MHz Image Size: 260 x 195 mm (II) NV(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0 (II) NV(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0 (II) NV(0): Serial No: IS91901973 (II) NV(0): Ranges: V min: 50 V max: 120 Hz, H min: 30 H max: 70 kHz, PixClock max 110 MHz (II) NV(0): Monitor name: E653 (II) NV(0): end of DDC Monitor info (==) NV(0): Using gamma correction (1.0, 1.0, 1.0) (II) NV(0): Generic Monitor: Using hsync range of 30.00-70.00 kHz (II) NV(0): Generic Monitor: Using vrefresh range of 50.00-120.00 Hz (II) NV(0): Clock range: 12.00 to 350.00 MHz (II) NV(0): Not using default mode "1280x960" (hsync out of range) (II) NV(0): Not using default mode "1280x1024" (hsync out of range) (II) NV(0): Not using default mode "1280x1024" (hsync out of range) (II) NV(0): Not using default mode "1600x1200" (hsync out of range) (II) NV(0): Not using default mode "1600x1200" (hsync out of range) (II) NV(0): Not using default mode "1600x1200" (hsync out of range) (II) NV(0): Not using default mode "1600x1200" (hsync out of range) (II) NV(0): Not using default mode "1600x1200" (hsync out of range) (II) NV(0): Not using default mode "1792x1344" (hsync out of range) (II) NV(0): Not using default mode "1792x1344" (hsync out of range) (II) NV(0): Not using default mode "1856x1392" (hsync out of range) (II) NV(0): Not using default mode "1856x1392" (hsync out of range) (II) NV(0): Not using default mode "1920x1440" (hsync out of range) (II) NV(0): Not using default mode "1920x1440" (hsync out of range) (II) NV(0): Not using default mode "1400x1050" (hsync out of range) (--) NV(0): Virtual size is 1280x960 (pitch 1280) (**) NV(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz (++) NV(0): DPI set to (100, 100) (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 0.1.0 (--) Depth 24 pixmap format is 32 bpp (==) NV(0): Write-combining range (0xf2000000,0x2000000) (II) NV(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Scanline Image Writes Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 32 256x256 slots 16 512x512 slots (==) NV(0): Backing store disabled (==) NV(0): Silken mouse enabled (**) NV(0): DPMS enabled PEXExtensionInit: Couldn't open default PEX font file Roman_M (II) Keyboard "Generic Keyboard" handled by legacy driver (**) Configured Mouse: Protocol: "ImPS/2" (**) Configured Mouse: Core Pointer (==) Configured Mouse: Buttons: 3 (**) Configured Mouse: ZAxisMapping: buttons 4 and 5 (II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE) _KDE_IceTransmkdir: Owner of /tmp/.ICE-unix should be set to root DCOPServer up and running. /etc/kde3/debian/startkde: kpersonalizer: command not found _KDE_IceTransmkdir: Owner of /tmp/.ICE-unix should be set to root DCOPServer up and running. QFont::setPointSize: Point size <= 0 (-3) mcop warning: user defined signal handler found for SIG_PIPE, overriding kdeinit: Shutting down running client. kio (KLauncher): ERROR: KLauncher: KDEInit communication error! Commiting suicide! Mutex destroy failure: Device or resource busy --------------------------------- It looks like dcopserver is already running. If you are sure that it is not already running, remove /home/ahewitt/.DCOPserver_rogue__0 and start dcopserver again. --------------------------------- KDE Daemon (kded) already running. _IceTransmkdir: Owner of /tmp/.ICE-unix should be set to root kwin: it looks like there's already a window manager running. kwin not started. xinit: connection to X server lost. X connection to :0.0 broken (explicit kill or server shutdown). kdeinit: Fatal IO error: client killed kdeinit: sending SIGHUP to children. Mutex destroy failure: Device or resource busy kdeinit: sending SIGTERM to children. kdeinit: Exit.
