Hi scott

There was a lot of discussion on this at LKML
http://lkml.org/

A quick search with 'Too much work at interrupt'

returned plenty, hopfully it will help.

Darren

On Thu, 23 Oct 2003, [EMAIL PROTECTED] wrote:

> Hi Sluggers,
> Last night a server died, and on reboot there are the following error 
> messages that constantly appear in the log:
> eth0: Too much work at interrupt, IntrStatus=0x0001.
> Oct 23 10:01:25 rrserver kernel: scsi0: PCI error Interrupt at seqaddr = 
> 0x8
> Oct 23 10:01:25 rrserver kernel: scsi0: Data Parity Error Detected during 
> address or write data phase
> 
> The eth0 error doesn't happen as often as the scsi error, I think it only 
> happens when someone tries to remotely connect to the server.
> The scsi error happens every 30 seconds or so, I guess this is becuase it 
> has a scsi hard drive.
> 
> Output of lspci:
> 00:00.0 Host bridge: VIA Technologies, Inc. VT8367 [KT266]
> 00:01.0 PCI bridge: VIA Technologies, Inc. VT8367 [KT266 AGP]
> 00:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 
> 10)
> 00:09.0 USB Controller: VIA Technologies, Inc. USB (rev 50)
> 00:09.1 USB Controller: VIA Technologies, Inc. USB (rev 50)
> 00:09.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51)
> 00:0c.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+] 
> (rev 44)
> 00:0d.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02)
> 00:0f.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
> 00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge
> 00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
> 00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 23)
> 00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 23)
> 
> This machine has been running for nearly a year flawlessly, no recent 
> changes, and it is not connected to the internet, so this is why I think 
> its a hardware issue - But where?
> 
> Any suggestions appreciated.
> 
> Thanks,
> 
> Scott
> 
> -- 
> Scott Ragen
> Support Manager/IT Administrator
> Roadtech Systems
> www.roadtech.com.au
> PH: +61 2 9807 3516 FAX: +61 2 9808 5294
> -- 
> SLUG - Sydney Linux User's Group - http://slug.org.au/
> More Info: http://lists.slug.org.au/listinfo/slug
--------------------------------------------------
Darren Williams <[EMAIL PROTECTED]>
[EMAIL PROTECTED] <www.gelato.unsw.edu.au>
--------------------------------------------------
-- 
SLUG - Sydney Linux User's Group - http://slug.org.au/
More Info: http://lists.slug.org.au/listinfo/slug

Reply via email to