Hi Rick, Thanks for your call.I have configured the switch to speed Auto and duplex auto and it is working fine now. By the way, is there any command in Linux I can use to Fix up my NIC to run Full duplex and Speed 100? By the way, I would like to be a member of SLUG. thanks again. Regards, Fazlur.
----- Original Message ---- From: Rick Welykochy <[EMAIL PROTECTED]> To: rahman fazlur <[EMAIL PROTECTED]> Cc: [email protected] Sent: Saturday, February 3, 2007 11:44:09 AM Subject: Re: [SLUG] Linux Questions rahman fazlur wrote: > With honour. I have a questions on Linux-- I will be happy if you can answer. > > I am trying to connect a Linux machine to Network. I am positive the network > card is fine as I tested it to connect another PC via cross-over cable. Now I > want to connect that PC to a Cisco switch 2950. I was not able to connect it. > The switch have no configuration at all except Vlan 1. > > With the same IP addressing I was able to connect a Windows PC to network not > a Linux PC. Is there any necessary thing I am missing out? I can connect a > windows PC but I want to connect Linux so I can learn it Better. By the way, > I am using KDE for X window. I have configured eth0 IP address and > Default-gateway as same like the Windows XP and activate it even though it is > not working. Login as root and type in the following commands and show us the output: route -n ifconfing -a cheers rickw -- _________________________________ Rick Welykochy || Praxis Services I didn't have time to write a short letter, so I wrote a long one instead. -- Mark Twain ____________________________________________________________________________________ No need to miss a message. Get email on-the-go with Yahoo! Mail for Mobile. Get started. http://mobile.yahoo.com/mail -- SLUG - Sydney Linux User's Group Mailing List - http://slug.org.au/ Subscription info and FAQs: http://slug.org.au/faq/mailinglists.html
