I had the same problem a while ago.
I took the init file from slurm-lnll and edit it.
i have sent it to the list a few month ago for the archives
I copy it again for you my modified initfile:
#!/bin/sh
#
# chkconfig: 345 90 10
# description: SLURM is a simple resource management system which \
# manages exclusive access o a set of compute \
# resources and distributes work to those resources.
#
# processname: /usr/sbin/slurmd
# pidfile: /var/run/slurm-llnl/slurmd.pid
#
# processname: /usr/sbin/slurmctld
# pidfile: /var/run/slurm-llnl/slurmctld.pid
#
# config: /etc/default/slurm-llnl
#
### BEGIN INIT INFO
# Provides: slurm-llnl
# Required-Start: $remote_fs $syslog $network munge
# Required-Stop: $remote_fs $syslog $network munge
# Should-Start: $named
# Should-Stop: $named
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: slurm daemon management
# Description: Start slurm to provide resource management
### END INIT INFO
BASEDIR=/opt/SLURM-2.3.4
BINDIR=$BASEDIR/bin
CONFDIR=$BASEDIR/etc
LIBDIR=$BASEDIR/lib
SBINDIR=$BASEDIR/sbin
#BINDIR=/usr/bin
#CONFDIR=/etc/slurm-llnl
#LIBDIR=/usr/lib
#SBINDIR=/usr/sbin
user=MPIuser
if [ ! -f $BINDIR/scontrol ] ; then
export PATH=$PATH:$BINDIR:$SBINDIR
fi
# Source slurm specific configuration
if [ -f /etc/default/slurm-llnl ] ; then
. /etc/default/slurm-llnl
else
SLURMCTLD_OPTIONS=""
SLURMD_OPTIONS=""
fi
# Checking for slurm.conf presence
if [ ! -f $CONFDIR/slurm.conf ] ; then
if [ -n "$(echo $1 | grep start)" ] ; then
echo Not starting slurm-llnl
fi
echo slurm.conf was not found in $CONFDIR
echo Please follow the instructions in \
/usr/share/doc/slurm-llnl/README.Debian.gz
exit 0
fi
test -f $BINDIR/scontrol || exit 0
DAEMONLIST=$($BINDIR/scontrol show daemons 2>/dev/null)
if [ $? = 0 ] ; then
for prog in $DAEMONLIST ; do
test -f $SBINDIR/$prog || exit 0
done
else
if [ -n "$(echo $1 | grep start)" ] ; then
echo "Not starting slurm-llnl for problems in the configuration file"
else
echo "Problems in the configuration file"
fi
echo "${CONFDIR}/slurm.conf"
echo "If upgrading from version 1.2 it is recommended that you rebuild"
echo "your configuration file. Please read instructions in"
echo " /usr/share/doc/slurm-llnl/README.Debian"
echo "Otherwise use \"scontrol show daemons\" for more information"
exit 0
fi
#Checking for lsb init function
if [ -f /lib/lsb/init-functions ] ; then
. /lib/lsb/init-functions
else
echo Can\'t find lsb init functions
exit 1
fi
# setup library paths for slurm and munge support
export LD_LIBRARY_PATH="$LIBDIR:$LD_LIBRARY_PATH"
export PATH="$BINDIR:$PATH"
#Function to check for cert and key presence and key vulnerabilty
checkcertkey()
{
MISSING=""
keyfile=""
certfile=""
if [ "$1" = "slurmd" ] ; then
keyfile=$(grep JobCredentialPublicCertificate $CONFDIR/slurm.conf \
| grep -v "^ *#")
keyfile=${keyfile##*=}
keyfile=${keyfile%#*}
[ -e $keyfile ] || MISSING="$keyfile"
elif [ "$1" = "slurmctld" ] ; then
keyfile=$(grep JobCredentialPrivateKey $CONFDIR/slurm.conf | grep -v "^ *#")
keyfile=${keyfile##*=}
keyfile=${keyfile%#*}
[ -e $keyfile ] || MISSING="$keyfile"
fi
if [ "${MISSING}" != "" ] ; then
echo Not starting slurm-llnl
echo $MISSING not found
echo Please follow the instructions in \
/usr/share/doc/slurm-llnl/README.cryptotype-openssl
exit 0
fi
if [ -f "$keyfile" ] && [ "$1" = "slurmctld" ] ; then
keycheck=$(openssl-vulnkey $keyfile | cut -d : -f 1)
if [ "$keycheck" = "COMPROMISED" ] ; then
echo Your slurm key stored in the file $keyfile
echo is vulnerable because has been created with a buggy openssl.
echo Please rebuild it with openssl version \>= 0.9.8g-9
echo More information in /usr/share/doc/slurm-llnl/README.Debian
exit 0
fi
fi
}
get_daemon_description()
{
case $1 in
slurmd)
echo slurm compute node daemon
;;
slurmctld)
echo slurm central management daemon
;;
*)
echo slurm daemon
;;
esac
}
start() {
CRYPTOTYPE=$(grep CryptoType $CONFDIR/slurm.conf | grep -v "^ *#")
CRYPTOTYPE=${CRYPTOTYPE##*=}
CRYPTOTYPE=${CRYPTOTYPE%#*}
if [ "$CRYPTOTYPE" = "crypto/openssl" ] ; then
checkcertkey $1
fi
# Create run-time variable data
mkdir -p /var/run/slurm-llnl
# chown slurm:slurm /var/run/slurm-llnl
chown $user:$user /var/run/slurm-llnl
if ! [ -e /var/log/slurm_jobcomp.log ] ; then
touch /var/log/slurm_jobcomp.log
chown $user:$user /var/log/slurm_jobcomp.log
fi
# Checking if SlurmdSpoolDir is under run
if [ "$1" = "slurmd" ] ; then
SDIRLOCATION=$(grep SlurmdSpoolDir $CONFDIR/slurm.conf \
| grep -v "^ *#")
SDIRLOCATION=${SDIRLOCATION##*=}
SDIRLOCATION=${SDIRLOCATION%#*}
if [ "${SDIRLOCATION}" = "/var/run/slurm-llnl/slurmd" ] ; then
if ! [ -e /var/run/slurm-llnl/slurmd ] ; then
ln -s /var/lib/slurm-llnl/slurmd /var/run/slurm-llnl/slurmd
fi
fi
fi
# Checking if StateSaveLocation is under run
if [ "$1" = "slurmctld" ] ; then
SDIRLOCATION=$(grep StateSaveLocation $CONFDIR/slurm.conf \
| grep -v "^ *#")
SDIRLOCATION=${SDIRLOCATION##*=}
SDIRLOCATION=${SDIRLOCATION%#*}
if [ "${SDIRLOCATION}" = "/var/run/slurm-llnl/slurmctld" ] ; then
if ! [ -e /var/run/slurm-llnl/slurmctld ] ; then
ln -s /var/lib/slurm-llnl/slurmctld /var/run/slurm-llnl/slurmctld
fi
fi
fi
desc="$(get_daemon_description $1)"
log_daemon_msg "Starting $desc" "$1"
unset HOME MAIL USER USERNAME
#FIXME $STARTPROC $SBINDIR/$1 $2
STARTERRORMSG="$(start-stop-daemon --start --oknodo \
--exec "$SBINDIR/$1" -- $2 2>&1)"
STATUS=$?
log_end_msg $STATUS
if [ "$STARTERRORMSG" != "" ] ; then
echo $STARTERRORMSG
fi
touch /var/lock/slurm
}
stop() {
desc="$(get_daemon_description $1)"
log_daemon_msg "Stopping $desc" "$1"
STOPERRORMSG="$(start-stop-daemon --oknodo --stop -s TERM \
--exec "$SBINDIR/$1" 2>&1)"
STATUS=$?
log_end_msg $STATUS
if [ "$STOPERRORMSG" != "" ] ; then
echo $STOPERRORMSG
fi
rm -f /var/lock/slurm
}
startall() {
for PROG in $DAEMONLIST ; do
case $PROG in
slurmd)
OPTVAR=$SLURMD_OPTIONS
;;
slurmctld)
OPTVAR=$SLURMCTLD_OPTIONS
;;
*)
;;
esac
start $PROG $OPTVAR
done
}
getpidfile() {
dpidfile=`grep -i ${1}pid $CONFDIR/slurm.conf | grep -v '^ *#'`
if [ $? = 0 ]; then
dpidfile=${dpidfile##*=}
dpidfile=${dpidfile%#*}
else
dpidfile=/var/run/${1}.pid
fi
echo $dpidfile
}
#
# status() with slight modifications to take into account
# instantiations of job manager slurmd's, which should not be
# counted as "running"
#
slurmstatus() {
base=${1##*/}
pidfile=$(getpidfile $base)
pid=`pidof -o $$ -o $$PPID -o %PPID -x $1 || \
pidof -o $$ -o $$PPID -o %PPID -x ${base}`
if [ -f $pidfile ]; then
read rpid < $pidfile
if [ "$rpid" != "" -a "$pid" != "" ]; then
for i in $pid ; do
if [ "$i" = "$rpid" ]; then
echo "${base} (pid $pid) is running..."
return 0
fi
done
elif [ "$rpid" != "" -a "$pid" = "" ]; then
# Due to change in user id, pid file may persist
# after slurmctld terminates
if [ "$base" != "slurmctld" ] ; then
echo "${base} dead but pid file exists"
fi
return 1
fi
fi
if [ "$base" = "slurmctld" -a "$pid" != "" ] ; then
echo "${base} (pid $pid) is running..."
return 0
fi
echo "${base} is stopped"
return 3
}
#
# stop slurm daemons,
# wait for termination to complete (up to 10 seconds) before returning
#
slurmstop() {
for prog in $DAEMONLIST ; do
stop $prog
for i in 1 2 3 4
do
sleep $i
slurmstatus $prog
if [ $? != 0 ]; then
break
fi
done
done
}
#
# The pathname substitution in daemon command assumes prefix and
# exec_prefix are same. This is the default, unless the user requests
# otherwise.
#
# Any node can be a slurm controller and/or server.
#
case "$1" in
start)
startall
;;
startclean)
SLURMCTLD_OPTIONS="-c $SLURMCTLD_OPTIONS"
SLURMD_OPTIONS="-c $SLURMD_OPTIONS"
startall
;;
stop)
slurmstop
;;
status)
for prog in $DAEMONLIST ; do
slurmstatus $prog
done
;;
restart)
$0 stop
$0 start
;;
force-reload)
$0 stop
$0 start
;;
condrestart)
if [ -f /var/lock/subsys/slurm ]; then
for prog in $DAEMONLIST ; do
stop $prog
start $prog
done
fi
;;
reconfig)
for prog in $DAEMONLIST ; do
PIDFILE=$(getpidfile $prog)
start-stop-daemon --stop --signal HUP --pidfile \
"$PIDFILE" --quiet $prog
done
;;
test)
for prog in $DAEMONLIST ; do
echo "$prog runs here"
done
;;
*)
echo "Usage: $0
{start|startclean|stop|status|restart|reconfig|condrestart|test}"
exit 1
;;
esac
2012/8/31 Jessica Rabbet <[email protected]>
> Hey guys, any ideas on the init files for ubuntu 10.04 when you build
> from source (2.4)? Can I use the one from the ubuntu package slurm-llnl and
> just edit to match filepaths?
>
>
> On Wed, Aug 29, 2012 at 7:29 PM, Jessica Rabbet <[email protected]>wrote:
>
>> The munge-dev had to be installed. I've got it up and running. Got help
>> from some guys in #hpc on irc. Thanks for the responses.
>>
>> On Wed, Aug 29, 2012 at 5:55 PM, Jessica Rabbet <[email protected]>wrote:
>>
>>> it did not detect the munge installation. What can I do to help it find
>>> it? Munge is working fine.
>>>
>>> user@svr:~/Downloads/slurm-2.4.2# grep -A3 'checking for munge'
>>> config.log
>>> configure:21993: checking for munge installation
>>> configure:22038: result:
>>> configure:22042: WARNING: unable to locate munge installation
>>> configure:22068: checking whether to enable multiple-slurmd support
>>>
>>>
>>>
>>> On Wed, Aug 29, 2012 at 5:44 PM, Jessica Rabbet <[email protected]>wrote:
>>>
>>>> I think I've resolved the folders and permissions issue. New errors
>>>> now. Is there an installation guide besides the quick start admin guide?
>>>>
>>>> user@svr:/var/lib/kestrel/images/ngsimage1$ sudo
>>>> /usr/local/sbin/slurmctld -Dcvvvv
>>>>
>>>> slurmctld: pidfile not locked, assuming no running daemon
>>>> slurmctld: error: Configured MailProg is invalid
>>>> slurmctld: debug3: Trying to load plugin
>>>> /usr/local/lib/slurm/accounting_storage_none.so
>>>> slurmctld: Accounting storage NOT INVOKED plugin loaded
>>>> slurmctld: debug3: Success.
>>>> slurmctld: debug3: not enforcing associations and no list was given so
>>>> we are giving a blank list
>>>> slurmctld: debug2: No Assoc usage file (/tmp/assoc_usage) to recover
>>>> slurmctld: slurmctld version 2.4.2 started on cluster cluster
>>>> slurmctld: debug3: Trying to load plugin
>>>> /usr/local/lib/slurm/crypto_munge.so
>>>> slurmctld: error: Couldn't find the specified plugin name for
>>>> crypto/munge looking at all files
>>>> slurmctld: error: can't find a plugin for type crypto/munge
>>>> slurmctld: error: cannot resolve crypto plugin operations
>>>> slurmctld: fatal: slurm_cred_creator_ctx_create((null)): Operation not
>>>> permitted
>>>>
>>>>
>>>
>>
>
--
« Quand le gouvernement viole les droits du peuple, l'insurrection est,
pour le peuple et pour chaque portion du peuple, le plus sacré des droits
et le plus indispensable des devoirs »
Déclaration des droits de l'homme et du citoyen, article 35, 1793
