Personally I hate those mounts what's this about it moving once tightened? Mine don't move once I tighten them however I have the washers's all properly and I really tighten it down and it REALLY don't move but yes the metal is flimsy so it bends quite easily that's one negative but it hasn't been a problem its just enough that I can bend it a lil uptilt if I need to.
Chris
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Friday, June 06, 2003 5:45 PM
To: [EMAIL PROTECTED]
Straight from the Tranzeo install manual.
Mike
Quoting Seeni <[EMAIL PROTECTED]>:
> Tim,
>
> If you have any better mounting brackets pictures, please forward to us.
>
>
> It is greatly appreciated.
>
> Seeni, SB support
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]] On Behalf Of
> [EMAIL PROTECTED]
> Sent: Saturday, June 07, 2003 4:17 AM
> To: '[EMAIL PROTECTED]'
> Subject: Re: [smartBridges] airPoint Total Mounting Brackets
>
> > sB needs to go back to the drawing board with the
> > Total mount. You can tighten
> > the pivot screw and still rotate the unit about
> > it quite easily. Don't get me
> > started on how easily the bracket bends.
> > The mount needs a pivot point screw and a vertical
> > adjustment screw to prevent
> > rotation. You can do it with a single u-bolt and a
> > slotted mount! The Tranzeo
> > mount is an example of a nice, simple design that
> > works well.
> >
> > Mike
> >
>
> Do tell? Which Tranzeo unit would that be? The one Tranzeo I have has
> *no*
> vertical tilt, only horizontal, and you can only attach it to a pole
> .unless you get creative (and hope your customer doesn't take a close
> look at it). I hijacked a ball-n-swivel bracket from one of my
> ArcWireless
> antennas and drilled holes into it so the Tranzeo would screw into it.
> Works nice, looks nice.
>
> Jason.. my ArcWireless mounts don't look like your pic. A lot simpler.
> Yours looks better (but what the hey, we're sticking pretty much with
> airTotals).
>
> Agreed. The airTOTALS could use a better (stronger, more versitle)
> mounting bracket.
>
> SmartBridges... do you want any closeup photos of the mounting brackets
> we're talking about? I think something like that would be an excellent
> feature.
>
> Tim Foster
> www.AledoBroadBand.com
> Aledo's only high-speed ISP
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://198.63.203.6
>
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges
> <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://198.63.203.6
>
