|
The new powerShot™ SB2811(remote reset) already enhanced with a built-in surge protection circuit. This circuit provides protection from over voltage caused by ESD (Electrostatic discharge), EFT (Electrical Fast Transients) and Lightning. The ESD protection is to withstand to IEC 61000-4-2 specifications of 15KV. The lightning protection is to withstand IEC 61000-4-5 specification for 12A (8/20 micro seconds. Any modification on the powershot will void the warranty.
Seeni. sB support
-----Original Message-----
In the powerShot SB2810 v0.2 (without remote reset) and the SB2811 v0.1 (with remote reset) there is IC U1 that is connected to all 4 data pins. What is U1's function? Also, may I use the info gained from opening the PS to create my own solution and post it to this list?
The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6 |
- [smartBridges] PowerShot info Tom Haynes
- RE: [smartBridges] PowerShot info Seeni
- RE: [smartBridges] PowerShot info Tom Haynes
- RE: [smartBridges] PowerShot info rich
- RE: [smartBridges] PowerShot info Mark P. Sullivan
