RE: [smartBridges] POE, voltage range

[Alex Wong]

Title: Message

That can be discussed..will work it out when it is near to release.

 

Alex

sB Tech Support

 

 

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Ramsey
Sent: Wednesday, June 11, 2003 11:52 PM
To: '[EMAIL PROTECTED]'
Subject: RE: [smartBridges] POE, voltage range

So for those of us who have been having power issues, or have had difficulty locating larger power supplies for their longer cable lengths, you're going to cut us a fantastic, incredible deal on these power adapters when they are released....right?????  :)

 

 

-----Original Message-----
From: Alex Wong [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 11, 2003 11:11 AM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges] POE, voltage range

This is going to change. As I mentioned earlier, we are working to have higher power voltage adaptor and with intelligent powershot that can dynamically adjust the power supply based on cable length sensed. So it will be one universal AC power adaptor.

 

Alex

sB Tech Support

 

 

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jack Berridge
Sent: Wednesday, June 11, 2003 9:37 PM
To: '[EMAIL PROTECTED]'
Subject: RE: [smartBridges] POE, voltage range

Curious.  If you highly recommend using smartBridges power supply for smartBridges devices, why doesn't smartBridges have a power supply and PoE solution that works to the maximum Ethernet cable specs (~300 feet)?  Why even have the 12v power supply?  Why not have an 18v power supply that will work with the 50' or less cable runs as well as the longer cable runs?  At least for the outdoor (WISP type) solutions.  Other vendors we work with use the higher end (18v, even 24v) power supplies and it works for the short as well as the long runs.  It just seems that the 12v has caused your user community more problems which are resolved by going to 15v or 18v solutions......why not have an 18v be the normal (default) solution for outdoor smartBridges solutions?

Thanks.


Jack



 PM 6/11/2003 +0800, you wrote:

If you are using any third party power supply, please use the regulated DC voltage power supply.   We are highly recommended to use our smartBridges               Power supply for our devices.  If the Ethernet cable length exceeds more than 50 meters, then only 18V is recommended.

 

Seeni,   SB support

 

 

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of phantam
Sent: Wednesday, June 11, 2003 9:57 AM
To: '[EMAIL PROTECTED]'
Subject: RE: [smartBridges] POE, voltage range

 

Dynamic power sounds intriguing.

 

---

From: Mark Koskenmaki [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, June 10, 2003 7:32 PM
To: [EMAIL PROTECTED]

 

Thank you.   I have no fears of even reaching 15V, but wanted to make sure that even if somehow things got to 15.5 or 16, it would be ok.

 

Thanks again.

 

Mark

 

 

NEOFAST.NET
North
East
Oregon
FAST
Net
mark(at)neofast.net

----- Original Message -----

From: Alex Wong

To: [EMAIL PROTECTED]

Sent: Tuesday, June 10, 2003 11:29 AM

Subject: RE: [smartBridges] POE, voltage range

We recommend 18V as max athough can be higher. Pls refer to this link for more details. http://www.smartbridges.com/new/products/ps.php

We are also in the development stage of having a dyanmic power supply that can automatically adjsut the power supply based on the cable sense.

Alex

sB Tech Support

-----Original Message-----

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Mark Koskenmaki

Sent: Wednesday, June 11, 2003 12:03 AM

To: '[EMAIL PROTECTED]'

Subject: [smartBridges] POE, voltage range

What's the upper limit for voltage, for POE on the ABO and APPO?

Thanks

NEOFAST.NET

North

East

Oregon

FAST

Net

mark(at)neofast.net

---

Outgoing mail is certified Virus Free.

Checked by AVG anti-virus system (http://www.grisoft.com).

Version: 6.0.488 / Virus Database: 287 - Release Date: 6/5/03