After having done this for 3.5 years now this is not the first time things like that have happened. It's happened with every manufacturer that comes to mind. Maybe not exactly that but something.....
One of the down sides to bleeding edge technology. Combine that with rock bottom prices and the problem can get even worse ;-). Anyone else remember 56k modems when they first came out? Talk about headaches! marlon ----- Original Message ----- From: "Dan Petermann" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Wednesday, June 18, 2003 3:58 PM Subject: Re: [smartBridges] Latest Batch? > I am seeing a lack of quality on recently received radios also. > Today I installed a ABO and after about 20 minutes the ethernet > link would go down and back up for about 5 seconds. I tried to > put in the IP info and after that simple monitor couldn't find the > radio. Defaulted it. It worked for about 5 minutes and then lost > association. After that it couldn't see the ap. I then burned the > config using simple deploy. Radio then says "unable to download > network settings. After that, ethernet dies. > > Head back to office to get another radio. I had unplugged the first radio > so I thought I'd check it. Ethernet now working, but only for a few minutes > before it drops and comes back. > > New radio swapped in. Guess what. Can't see AP. Ehternet flakes > out after about 5 minutes. > > Looks real impressive working in the customers office spending 6 hours > messing with radios. > > Dan Petermann > Wyoming.com > > At 03:31 PM 6/18/2003 -0700, BROWNLEE,BRAD (HP-FtCollins,ex1) wrote: > >Does Smartbridges have any official word on if they think there may be a > >problem with the latest batch of radios? > > > >We have had two new ( received about 2 weeks ago) Airbridge Totals fail > >within a week. The problems with these seem to be on the RF side with one > >having a 30% receive loss (as compared to other radio's at same location) > >and the other not receiving at all. (Please no trouble shooting needed, > >just want to know if anything is going on). > > > > > >Thanks > >Brad Brownlee > >Skylink Broadband Internet LLC > >Eaton CO > > > > > > > > > >-----Original Message----- > >From: [EMAIL PROTECTED] > >[mailto:[EMAIL PROTECTED] > >Sent: Wednesday, June 18, 2003 3:27 PM > >To: [EMAIL PROTECTED] > >Subject: RE: [smartBridges] best way to log data for tech support? > > > > > > >These posts are scaring me!!! > > > > > >I still have yet to deploy any of my latest group of airBridge units > > >(from electro-comm's lastest batch). I am hearing weird stuff > > >everyday. > > > > > >I don't have any BIG concerns with any of my old units!! > > > > > >I PRAY this doesn't happen to me!! > > > > > >Sully > > > > > >I hear ya! > > > >The few new units that I've received work ok. The email problem I'm having > >is tripping me out, but it's on my old radios. (well.. they're about 2 > >months old). > > > > > >If anyone has an idea about this email sending problem, please speak up! > > > >(just to recap... setting RTS numbers too low kills SMTP. Setting it too hig > >bogs everything down with ACK failures and resends) > > > >Thanks. > > > >Tim Foster > >www.AledoBroadBand.com > >Aledo's only high-speed ISP > > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
